Rake tedder roller GVV 6

Rake tedders windrow for raking grass in rolls, 8 wheels, working width 6 m. Workers and transport wheels on alloy hubs with double row bearing. Have undergone special heat treatment twin prongs of spring steel impellers ensure a long-lasting job, and the special geometry of the teeth allows you to work on torsion in two dimensions without a break even when hit by stones. The tines have a certificate of compliance. The basic mechanisms of the rake – frame and a traction pole is made from special square tube, giving the whole structure a special strength. The hydraulic cylinder C 80.40.400 is 4-fold reserve of power. The advantages of rake tedder produced by our company: the rake can be easily transferred to a working position folded in transport, with the help of the hydraulic system from the tractor cab, which is very convenient for turns and moving from field to field; — rake without loss clean high and low yielding herbage, due to the location of the wheels overlapping half of the previous one; — rakes allow you to remove the crop with high speed to 15 km/h — the rake is simple and reliable in operation; is aggregated with tractors of low power T-25 and analogues. Description A rake used for harvesting seed of grass and grass of natural hayfields yield over 10 t/ha in the plains at a relative humidity of masses from 25 to 80. A rake can be performed the following works: raking dry mass from swaths rolls; tedding dry mass in swaths; wrapping roll; doubling the rolls by their linear density 2 kg/RM.m. Technical characteristic. Name Value Brand GVV-6,0 Type finger Wheel semi-trailer Width, m 6,0 The highest productivity per hour of pure work ha/h of 8.62 Working speed, km/h, not more than 12 Transport speed, km/h not more 20 Weight, kg, not more than 357 The dimensions of the two sections in the Assembly, mm, not more than when shoveling: length 4900 width 8000 the altitude of 1400 when tedding: length 4900 9400 width the altitude of 1400 in the transport position: length 5000 width 2400 the altitude of 3500 Track width in transport position, mm, not more than 2000 The number of sections, PCs 2 The total number of work wheels on the car, pieces of 8 The drive of the impeller through the clutch spring fingers with the soil Is aggregated with tractors MTZ-50(52), MTZ-80(82), UMZ-6, T-40, T-30, T-25A