QING'AN Refrigerator Compressor

Specification of compressors 1. Application scope: Room air conditioners 2. Rated voltage/frequency/phase: 220-240V/50Hz/1 3. Refrigerant: R22 4. Rage of ambient temperature: -5 43 5. Range of evaporating temperature: 45 65 6. Working capacity: 22.6CM3/rev 7. Rated capacity 3850w(220V) 8. Motor input power: 1280w(220V) 9. Running current: 5.5A (220V). 10. EER: 3.3 W/W 11. Refrigeration oil: 4GSDI 12. Amount of oil charge: 410ml 13. Net weight: 15.6kg 14. Motor: Motor type, permanent split capacitorted 15. Locked rotor amps: 38a( 220V), 16. Running capacitor: 30f/450V/AC 17. Insulation class: Class B 18. Winding resistance(M/S): 2.07/4.34OM@20) 19. Outer compound protector: V260-150-141E OR: MRA13401-9201 20. Working conditions: NOMINAL OVERLOAD Evaporating temperature 7.2 10.0 Condensing temperature 54.4 65.8 Super-coding temperature 8.3 5 Suction gas temperature 35.0 18.0 Ambient temperature 35.0 25.0 21. Specific performance A. Temperature of motor winding: 130 max B. Vibration: 40M/S2 max C. Noise: 55dB(A) max D. LEAKAGE TESTING PRESSURE: 2.95mpa E. Mechanical strength pressure: 10.5mpa F. Insulation resistance: ≥30MOM G. Electric strength: 1500V H. Residual moisture: 200mg max I. Residual impurity: 40mg max 22. Operating conditions A. Start-up voltage( min): 58% of rated voltage; B. Running voltage range: +/-10% of rated voltage; C. When the compressor has been installed into the refrigerating system, it should remain perpendicular to the leveling floor with max inclination no more than 5° D. The period of turning down and restarting the compressor should be more than 3 minutes ; E. The residual moisture in the refrigerating system (not include the compressor ) should not exceed 60ppm, the residual impurity in the refrigerating system (not include the compressor) should not exceed 20mg; F. The filling amount of refrigerant should not 1250g; G. When the electric container cap is installed, the nut screw moment is 1.8N. M