Pure steam generator

Summary: This is the ultra-pure pyrogen-free steam generator. The raw water is adopted deion water. It is one kind of equipment, which is produced pure steam by heating steam. With the reasonable structure, easy operation, high efficiency and low consume, it is the perfect equipment for hospital, pharmaceutical, electronic, food and drinking industries, it is also the good equipment which satisfied the pharmaceutical industry cGMP standard. Working principle of CZQ pure steam generator The equipment has 3 parts, evaporator, preheater and electric automatic control. The evaporator is adopted the special separating way: membrane evaporation + gravity sedimentation + wire despumation. The qualified raw water is input into the preheater after increased the pressure by multilevel pump, and then passed through the flow meter. After heating exchange, the temperature is lower 10-15 than the temperature of heating steam water in evaporator. Next the raw water is input into the raw water distributor of the evaporator, which is spouted to the inside of the heating tubes. So that the raw water in the tube is flowed as membrane. Then the raw water is became the second steam with drip, which is boiloff by boiler steam. The steam is entered into the third grade separating setting from bottom of the heating tube, after separation, it is produced the ultra-pure pyrogen-free steam. It can be online inspected the conductivity of the pure steam condensate water, so it can be inspected that whether the pure steam is qualified. In the evaporator, the boiler steam is absorbed by raw water, and then it is condensed into condensed water as heating for pre-heater. And the preheated raw water is drained from incondensable outlet of pre-heater.