printed PTP Aluminium Foil

Features: 1) Resistant to gas, moisture, light and chemical 2) High stability and sanitation standards 3) one side coated HSL for heat sealing with PVC, PVC/PVDC or ALU ALU FOIL. Aclor film 4) Applications: Blister packages for pharmaceutical products, such as capsules and tablets Specifications:1) alloy:80112) temper: Hard 3) width: ≤600 (according customer requirements) 4) Thickness: 20-30micron (before coating)5) Classification: Unprinted, printed6) Coating thickness options:1 .4-6GSM with tolerance of +/-0.5GSM2 .6-8GSM with tolerance of +/-0.5GSM standard, if not specified, heat sealing coating is 4 with a with tolerance of +/-0.5GSM , both seal strength with PVC/PVDC 8N/25mm min,3 .primer or OP: 1 GSM7) printing and lacquer coating: printed as per tex, layout and shade approved by customer. for non-printed specification, clear lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coating are capable to with standard 180deg. C for 1 sec. dwell time.8) structure: HSL/ALU FOIL/printing layer/OPHSL/printing/ alu foil/printing/OPHSL/printing /alu foil/OPHSL/ALU FOIL/ OPHSL/ALU FOIL/primer (printable)9)Inner packing: core dameter:76mm, out diameter: 240-280mm Max ( as your requirements)10) Out packing: protected by plastic bag, foam, hard carton, wooden pallets.