Pressurized Solar Water Heater, solar heating solu

Pressurized Solar Water Heater, solar heating solu

original price: 100,00 USD
China
Production capacity:
1000 Set / Month
China
Company
86-573-86771806
nina zhang
Contact person

Basic Information

Certification CE
Capacity 200
Place of Origin Zhejiang China (Mainland)
Brand Name OEM
Type Evacuated Tube
Pressure Pressurized
Heating System Batch / ICS (Passive)
Connection Type Direct-Plug
Solar water heater The system of solar water heater relies on a natural Principle--"Thermosiphon". The key important point of these systems is that: the storage tank is always located higher than the collector. As the sun's rays hit the all-glass evacuated solar collector tubes, the temperature of the water in the tubes rises making it less dense or lighter. Hot and lighter water naturally moves up to the top of collector and through the evacuated collector tube convert to the storage tank. This makes the colder and heavier water in water tank moves down to the bottom of the collector. This continuous displacement occurs naturally. So the users can get the hot water from the tank. The system of solar water heater is an "Open Circuit" non-pressure system. By the air vent valve on the top of the storage cylinder and the over flow pipe in the bottom it maintains open to the air. Materials: Inner tank: Imported 304 2B food grade stainless steel, thickness is 0.5mm Outer tank: Imported nacre white armor plate or stainless steel Insulating layer :50mm-60mm high pressure polyurethane foamed Bracket: premium cold roll bracket stainless steel screw Vacuum tube: 3.3high borosilicate glass The vacuum tube of our solar water heater has the high absorption rate and low emission rate, The absorption rate is 0.90-0.93 (AM1.5) The emission rate is 0.05-0.075 (80±5) Vacuum tightness is P≤5.0*0.0001Pa Idle sunning property parameters is Y=220-260./KW The average heat loss coefficient is Ult=0.6-0.7W(.) It means the temperature in the water tank is range from 50 to 95. Characteristic 1. Best angle of stand makes the heat efficiency is very high. 2. All inner tank is produced by high-frequency ring welding or argon arc welding, which is very durable; high density. 3. The insulating layer made of high pressure polyurethane foamed. 4. The water inlet or outlet can be set up as your requirement. 5. Intelligent controller or electrical heat element can be chosen for this system according to your requirement. 6. Advanced technology,which can dispose of scale ,bacteria and prevent linghnting. 7. Environmental friendly

Delivery terms and packaging

Packaging Detail: SeaworthyCTN package Delivery Detail: within 15 day
Port: Shanghai/ Ningbo

Payment term

Letter of credit

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product