Portable Rockwell Hardness Tester

Features Miniaturization of Rockwell hardness tester, the smallest model weighs only 0.8kg and the operation is similar to that of a micrometer. The testing principle and accuracy comply with ISO 6508 and ASTM E110, tested by National Institute of Metrology with error less than 1.5HRC, same as the bench type. The instrument is composed of tester and bench stand, can be used on table or on site in the factory. Can test many kinds of thin, small, long and irregular parts that cannot be tested by the bench type. Well suits for testing the workpieces with small supporting surface. Traceable standard hardness block. Indenter inspected with standard Rockwell hardness tester. Test force calibrated with load cells directly traceable to national secondary benchmark. Main Technical ParametersInitial Test Force: 10 kgTotal Test Force:60 kg, 100 kg or 150 kgIndenter:120°diamond cone1.588mm carbide ballForce Applying Method:by screwTesting Range:Rockwell hardness HRC, HRB, HRA,etc.15 scales.Accuracy:Meets requirements of ISO6508Resolution:0.5HRApplication:All metals, including steel, casr iron,alloy, titanium alloy, copper and copper alloy,aluminum and aluminum alloy and carbides etc.Standard Package1 Tester 1 Bench stand 1 Diamond indenter (120°cone) 2Ball indenters (Φ 1.588mm) 1 Flat anvil 1 V anvil 3 Standard Rockwell hardnessblocks 1-2 Extensions 1 Carrying caseOptional Accessaries120°diamond cone indenter Carbide ball indenter (1.588mm, 3.175mm) Steel ball indenter (6.35mm, 12.7mm) Standard test blocks (HRA, HRC-High, HRC-Medium, HRC-Low, HRB) Raised spot anvil Slim raised spot anvil (for small supporting surface workpieces) Concave cylindrical anvil Convex cylindrical anvil (for tubing, curved sheets) Anvil for testing ball (for steel ball) Spare magnifier Model SelectionModel Opening Size (W×D)Net Weight (kg)Package Weight (kg)Package Dimensions (mm)PHR-125mm×25mm0.72.8325×240×140PHR-250mm×50mm1.23.7390×280×160PHR-4-2100mm×50mm1.55.2510×375×177PHR-4-4100mm×100mm2.56.1510×375×177Bench Stand(standard accessory)4.64.9215×148×232Remarks: The first number in the model specification means the opening width(inch), the second number means the opening depth(inch), if only one number it means the width and depth are the same value.