PLF High Pressure Line Hydraulic Filter Series (6.

PLF High Pressure LineHydraulic Filter Series INTRODUCTION: PLF High Pressure Line OilFilter Series can be equipped in the pressure line of hydraulic system with different pressure of high pressure type, and used in the pressure line of hydraulic system. It can remove all the contaminant from hydraulic system. The element of this series is made of glass fiber, it has high filtration and efficiency, large dirt-holding capacity and low initial pressure drop. Beta ratio id over 200, filtration efficiency ≥99.5%, being coincide with the standard of ISO. This filter structure has the following features: 1. Compare with the same flowing rate filter, it has more compact structure and smaller measurement. 2. It is available to wide range of pressure. 3. It is convenient to replacing filter element. The customers can change the filter depend on installing areas or bring the element down by taking the cover off directly. 4. Installation and fixation easy: If the customer meets the installing problem, they only need strike four screws in the cover out and remove the screw 180 degree. 5. It has two protection equipments which are by-pass valve and contaminant indicator. The indicator will act when the pressure drop across element attains adjustable pressure, the element should be cleaned or changed in time. Otherwise, the by-pass valve will act automatically to protect filter safety.