Plastic formwork

Plastic formwork for pouring foundations, walls, columns, ceilings. The basis of this formwork - plastic shields size 600х300мм that are connected by key-bolts. This is a universal formwork for casting of walls and columns, floor slabs and foundations. Plastic small-panel formwork – fast-easy going in large areas without the use of mechanisms with little additional work. Shuttering boards are made of impact-resistant, frost-resistant material – polypropylene. Plastic formwork is completed in accordance with the project the following elements: For walls and columns: Extract the zip ties with bolts; Turning (internal and external angle stiffeners); Horizontal stiffeners; Additional metallic elements (which allow you to get away from multiplicity of 300 mm when designing the nodes of the walls and columns). The shuttering boards are designed for shaping plane and fill are joined together by key-bolts. The angle profile required for corner joints, fill planes at an angle of 90 degrees. The leveling bolt is mounted horizontally at the connection of the shields with the screws and nuts to ensure greater rigidity. Instead of leveling brackets, you can use a wooden block 60x60 mm.