PIR Multifunctional Dogs/Cats/Birds Repeller

PIR Multifunctional Dogs/Cats/Birds Repeller AN-B010The device can emit ultrasonic, strong flash,high-decibel sound waves to drive away animals (such as cats, dogs, birds, mice, etc.) via function adjust button A according to different environmental needs. Applicability: PIR Multifunctional Dogs/Cats/Birds Repeller: suitable environment garden,yard,home and apartments,food service ,farms and so on. Technical data: 1.Power Supply: 9-volt battery stacked or a mains powered 9V adaptor2.Passive infrared area: 70 square meter3.Passive infrared area: 110 degree4.Frequency range:15-26KHZ5.Audio frequency:app 7KHZ6.Output sound pressure : 110 dB Specifications : PIR Multifunctional Dogs/Cats/Birds Repellerhas two work patterns for your choice, one pattern is auto-work ,the other pattern is passive infrared trigger work.Mode one with yellow LED:Ultrasound+Alarm+FlashingMode two with green LED:Ultrasound+FlashingMode three with red LED:UltrasoundMode four with the red flashing LED: Long time ultrasound without passive infrared(the LED refer to photo)Method: 1.Put on the battery or plug unit intosocket,the head of 8 LED light will flash and indicate the power has been connected,2 second later the device prepare for work. Long press the button A( refer to photo ) the yellow LED auto turn on and enter into the first working mode, after about 20 seconds into the alert mode, When the passive infrared probe to the target, trigger the first mode work(ultrasonic+alarm+falishing), work continued 30 seconds enter into the alert mode again.2.You can choose different working mode according to different using environment,after the power turn on and long press the button A enter into the state of choose working mode,then press the button A to choose the working mode (yellow LED,green LED,red LED and flashing the red LED)3. The conversion time of first three modes, need 10 seconds enter into the alert mode and the first three modes are all woking by the passive infrared. working cycle is about 30 seconds,4.Long press the button A,turn off the power(turn off all LED),the device stop working. Attention: 1.The environment have long time nobody stay,please pull out the plug or take off the battery.2.Keep in mind the frequency waves will not travel through the furniture or other goods.Make sure to plug the unit into an outlet clear of surrounding object.3.Try to avoid work long time in wet situation and prohibit use devoice dip in the water.4.In order to make the device long time working,we suggest you use the adapter(DC 9V,600mA) if the environment allowed.