pipe expander

pipe expander

Taiyuan, China
Production capacity:
1 Set / Month
Taiyuan, China
zhiguang dun
Contact person

Basic Information

Pipe mill material : carbon steel Application: Energy supply pipe Mechanical expanding packing suitable for the distance shipment. Application and features of the machineThe single head mechanical expander for pipe is the necessary special equipment LSAW line for oil and gas transportation, whose performance is as following: 1) Expanding to radial of pipe so as to reach the precise roundness and diameter. 2) Reliving the stress of pipe in the process of cold rolling, increase the yield stress of material . 3) Inspection for the weld seam. The expanding for pipe is processed by stages. The pipe is carried into the expander head by the feeding carriage, which is expanded by stages till full length of pipe. The machine is machine group type. There are 3 functional working positions in the lengthwise position. 1) It is the front washing work position from pipe feeding direction 2) Expanding position in the middle 3) Next is post washing position It is 2 transverse cars and its rails crossed 3 positions in the horizontal position. Every mechanism on each working position can work separately and together. Each work position can work separately. 3 working positions and 2 transverse cars can automatically work together. Technical requirements to expanded pipe1) Minimum pipe outside diameter 20 (508mm) 2) Maximum pipe outside diameter 56 (1422mm) 3) Minimum pipe length :8m 4) Maximum pipe length: 12.2m 5) Minimum pipe wall thickness: 6.4mm 6) Maximum pipe wall thickness: 40.00mm 7) Material grade API.X70 (yield strength maximum 62/Mpa) Wall thickness will be reduced according to material grade API. X80 ?(yield strength maximum 690Mpa) 8) Physical properly deviation of material (yield strength):≤10 of full material rage 9) Wall thickness deviation of material:≤5 of full dimension 10) Roundness of pipe ≤0.3% 11) Straightness of pipe:≤0.3% of full pipe length 12) Surplus height of seam :≤3.5mm , width of seam ≤35mm Main parameter Type of machine: machine groupExpanding mode: mechanical expandingSteel pipe rangeDiameter: Φ508 Φ1422mm , wall thickness: 8-40mm, length: 8-12m Material grade: X70 (API standard) Expanding rate range 0.8-1.5, optimum range :1-1.12Precision range of steel pipe after expanding: tolerance of diameter roundness ≤±0.8D, tolerance of diameter straightness ≤0.2Production efficiency :Oil cylinder, mounting type horizontal Nominal pull force 16069KN Nominal pull force for large oil cylinder 12812KN Nominal pull force for small oil cylinder 3257KN Rated working pressure 25Mpa Expanding speed: 4-8M/M

Delivery terms and packaging

Packaging Detail: According to the contract or the standard exporting packing. Delivery Detail: within 6 month
Port: Tianjin port

Payment term

Letter of credit

Telegraphic transfer


    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty

    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!


    Рынок B2B
    Cancel Close
      Show more close
        Area search