P1302 HUAYU Development Module kernel board genera

The Philosophy of HUAYU Development Module Almost every electronics equipment has control unit, eg. MCU51, PIC, ARM, etc. Every project needs it, and every project has to do it again and again. This work on control unit takes up about 80% of the whole work. However, the real task of the equipment, like data acquisition and processing, only takes less than 20% of the project. So there is the problem: too much repetition work on control unit, which seriously delay the project process and affect the quality. The HUAYU Development Module will release you from the burden of repetition work. It is an ideal general control unit with plenty of peripheral functions and external interfaces. You could concentracte on the real work. Based on a mobile system, the HUAYU Development Module is a general module, which consists of a general control unit and rich peripherals including GPRS, Bluetooth, Camera, MP3, MP4, U-disk, TF card. You could consider it as a micro computer with far distance wireless communication and short distance communication. Moreover, the HUAYU Development Module provides a great deal of external interfaces, which could be used directly into your own project. It supports C and Java programming. It will promote your work efficiency and reduce your product cost. Take the wireless data acquisition equipment for example, the traditional solution is using MCU51 or ARM as control unit with a GPRS module and a function mudule like RFID. If we use HUAYU Development Module, we only need a RFID module, and the system itself works stably with mature power management, GUI etc. It will only take a few days to finish the whole project, including hardware design and software programming. System Design Request Using the HUAYU Development Module, we also provide whole system design of wireless network solution and data processing, store and retransmission. Custom-tailor system design request is accepted. Model: P1302 (Kernel Board) P1302 is the same function as P1300, but with much smaller size. It is more suitable to integrate the kernel board into your own product. LCM, keys, SIM card socket is not included, but you could add it according to your system design. Hardware Resource 1, Main Processing Unit: MTK6225(ARM7 104MHz) 2, RAM64Mbit 3, Nor Flash128Mbit 4, Nand Flash128MBytes 5, Support External TF CardUp to 4GBytes 6, Support LCD: 2.4/2.8/3.2 inch TFT LCM,320×240, with touch panel 7, Support mp3,mp4 8, Support camera (30M pixle) 9, Support stereo speaker 10, Support serial interface & USB interface 11, Support Bluetooth 12, Support GPRS 13, Support Mobile communication, SMS, MMS 14, Support earphone output 15, Support internal antenna 16, Support Lion Battery 700mAh 17, Provide 128Pin external interface (audio interface, SD card, SIM card, digital interface level,USB,2 serial interfaces, keys,Camera,ADC,GPIO,parallel interface) Software Resource 1, OS: MTK Nucleus, a RTOS 2, GUI like WIN32 3, programming language: C & Java (J2ME) Documents a whole set of documents, including hardware, software, development environment, download and debug tools, etc.