Optical fiber cable GYTC8A

Optical fiber cable GYTC8A Figure 8 Cable Description: The fibers, 250μm are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE)sheath to be figure 8 structure. Zhongtian Wire & Cable figure 8 cable GYTC8Y, GYTC8S are also available on request. This type is specifically applied for self-supporting aerial installation. Characteristics: 1)High tensile strength of stranded wires meet the requirement of self-supporting and reduce the 2)installation cost. 3)Good mechanical and temperature performance 4)High strength loose tube that is hydrolysis resistant 5)Special tube filling compound ensure a critical protection of fiber 6)The following measures are taken to ensure the cable watertight: Steel wire used as the central strength member Loose tube filling compound 100% cable core filling APL moisture barrier Standards: Zhongtian Cables GYTC8A cable complies with Standard YD/T901-2001 as well as IEC 60794-1 Technical parameters: Cable type (increased by 2 fibers) Fiber count Tubes Fillers Tensile strength Long/short Term N Crush Resistance Long/short term N/100mm Bending Radius Static/Dynamic mm GYTC8A-2 6Xn 2 6 1 4 600/1500 300/1000 10D/20D GYTC8A-8 12Xn 8 12 2 3 600/1500 300/1000 10D/20D GYTC8A-14 18Xn 14 18 3 2 600/1500 300/1000 10D/20D GYTC8A-20 24Xn 20 24 4 1 600/1500 300/1000 10D/20D GYTC8A-26 30Xn 26 30 5 0 600/1500 300/1000 10D/20D Storage/Operating Temperature: -40°Cto+70°C Delivery Length: Standard Reel Length:2000m;Other lengths available on request. Options: 1)Fiber Type: G.652,G.655orG.657single-mode fiber,Ala or Alb multi-mode fiber,or other types of fiber; 2)Fiber Count:Total number of fibers in the cable; 3)Jacket Material:Environmental flame-retardant polyvinyl chloride(PVC),environmental low smoke zero halogen flame retardant polyolefin(LSZH),environmental thermoplatic polyurethane(TPU),or other contracted material; 4)Jacket Color:(Including color of fiber)meets the requirements of relevant standards,or other contracted color; 5)Cable Dimension:The nomina cable dimension,or other contracred dimension.