oil transportation and suction rubber hose

1.Cord oil rubber hose USE: Be applicableto transport gasoline,kerosene,diesel,engine oil,lubricant and other mineral oils below 40 degree. CHARACTERISTICS: The hose is made of the synthetic rubber which is excellent in oil-resistance .The burst pressure of the hose is four times or more higher than the working pressure. 2.Fiber spiral oil rubber hose USE: Be applicable to transport gasoline,kerosene,diesel,engine oil,lubricant and other mineral oils below 40 The outside surface of the hose is smooth and the layer is made of the synethetic rubber with the property of anti-erosion by oil,which makes the hose good at oil-resistance.The burst pressure of the hose is four times or more higher than the working pressure. 3.oil suction and discharge rubber hose. USE: Be applicable to suck or transport gasoline,kerosene,diesel,engine oil,heavy oil and other mineral oils CHARACTERISTICS: The hose has the double properties of bearing both the positive and negative pressures,can be used normally under the pressure of -80kpa(600mm mercury) at the vacuum. the hose can't become flat under pressure ,and can't off from it's layer,and has good bending property the body is solid and is capable of adapting to working conditions. 4.Sea oil rubber hose pre-buried. USE: Used to suck or transport crude oil, heavy oil,kerosene and other mineral oils in the giant oil liners. CHARACTERISTICS: The hose can be bear both the positive and negative pressures. it is very convenient to use the metal flanges in both ends. The hose is made of high-quality oil-resisting rubber ,solid and hardly distorted ,strong against strain,and is applicable in complicated environment.