New automatic pocket-spring production line

DZH-3 New automatic pocket-spring production line is professional equipment for producing pocket spring units. This mattress machine consists of the pocket spring coiling machineand the automatic Pocket Spring Assembler. Firstly, the pocket spring rows are produced by the pocket spring machine, and then transferred to the gluing system by the connection system. After this, the glue is extruded onto the spring rows and/or top and bottom non-woven fabric to make them a unit. When a unit is finished, the machine will automatically cut the up and down non-woven fabric if used. This mattress machine finishes the whole production process from wire to whole spring unit, and it's fully automatic and labor saving. Further, it's of safety and high capacity. This pocket spring machine bears the features below: compact design, easy operation,high capacity and cost saving.It's an ideal equipment for spring units production. Main Technical Parmeters: Production Capacity 65 Pcs/min Overall Dimension For Pocket Spring Machine 390×1720×1730mm(excluding the fabric or wire shifts) Overall Dimension For Assembler 3720×3350×1800mm Power Supply 3-Phase, 380V, 50Hz Air Pressure (0.8-1.2)Mpa Air Consumption >2.2m3/min Total Power 42.71KW Pocket Spring Machine Power 35KW Pocket Spring Assembler Power 7.71KW Spring Height Before Pocketed (160-240)mm Spring Height After Pocketed (120-220)mm Wire Diameter (Φ1.8-Φ2.3)mm End-Coil Diameter (Φ52-Φ70)mm Mid-Coil Diameter (Φ62-Φ70)mm Non-Woven Fabric Width For Pocketing (400-520)mm Non-Woven Fabric Thickness ≥70g/m² Non-Woven Fabric Width For Assembling (700-2100)mm Outer Diameter Of Non-Woven Fabric Reel For Assembling ≤1000mm, height≤150Kg Gluing Unit Width: ≤2100mm