Needle flame tester

Needle Flame Tester is designed according to the standards requirements of IEC 60695-11-5 and GB5169.5. The Characteristic of the shape and the structure is similar to the ATLAS. The gas source of the test flame is adopted by distributors butane gas, the needle of the burner use the pinhead which diameter is 0.5±0.1mm, and the out diameter is less than 0.9mm, long above the 35mm, no air input. The height of the flame can be convenience adjusted 12mm ± 1mm, to regulate according to the standards requirement, it also has a high level measurement apparatus.Technical parameters 1. The temperature of flame measurement rose from 100 ° C ± 2° C to 700 ° C ± 3 ° C in the time period of 23.5s±1.0s. 2. The imposing time of the flame can be adjusted in the scope of 0 to 99 minutes and 99seconds, automatic control, it can record the time of combustion duration (Tb) 3. Automatic ignition. 4. With temperature measurement timing device.