NC servo press feeder - Press peripheral equipment

Features of NC ServopressFeeder (press peripheral equipment)- SAF1. High precision feeding: Aiming at the arrival of hi-tech industry, it is controlled by computer closed-circuit feedback system. So that the precision can maintain within +/-0.03mm.2. Phase-style feeding function: It can input 20 groups of different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products (option)3. Manual model: It can input 3 phases manual speed, which can let used operate more easily and feed materials more accuracy.4. High efficiency release device: It can set up release angle quickly, only mact CAM signal of and adjusted feed thickness can done.5. Feeding length setting: Input feed length on the controller panel directly.6. Feeding unit: The roll adopts middle-hollow style. Being light and with low inertia for electroplate. The surface hardness HRC is 60 and hard chrome plated. ModelNCF-100NCF-100ANCF-200NCF-200ANCF-300NCF-300ANCF-400NCF-400ANCF-500NCF-500ANCF-600NCF-600ANCF-700NCF-700ANCF-800NCF-800ANCF-1000NCF-1000ANCF-1300NCF-1300ANCF-1600NCF-1600AStandard typeMaterial Thickness(mm)0.2-3.2Material width for different thickness0.2-1.01002003004005006007008001000130016002.0901802803003504004504805506507003.24080100120150180210240280320360A typeMaterial Thickness (mm)0.3-4.5Material width for different thickness0.3-2.21002003004005006007008001000130016003.2801602403204004605205605806006504.550120150220250280300320350360380Feed length (mm)9999.99Feed speed (m/min)20Servo Motor (KW)Standard typeAC0.4AC0.75AC0.85AC1.3AC1.3AC1.8AC1.8AC2.9AC4.4AC5.5AC7.5Servo Motor (KW)A typeAC1.3AC1.3AC1.8AC2.9AC2.9AC2.9AC2.9AC4.4AC5.5AC7.5AC11Power supplyStandard type220V/Single-phase380V/415V 3-phasePower supplyA type380V/415V 3-phasePass line height(mm)70-17090-190