National Patent Used Black Oil Refining Machine

Feature 1. The regenerated oil can reach the international new oil standard and it could pass test by professional detection station both at homeand abroad 2. This machine is widely used to purify many kinds of waste oil such as quencher oil, hydraulic oil, compressor oil, diesel oil etc. 3. This machine, researched and manufactured by FUDA, has got national invention patent. The patent No. is C10M175/00. .The used oil can be refined: Engine oil .lubrication oil . coal oil ,diesel oil ,hydraulic oil ,transfomer oil .switch oil ,inject oil ,turbine oil ,coppressor oil .refrigeration oil ,quencher oil ,.mid-load gear oil and so on, Technical Superiority 1.Heating system. Unique design of two heating systems to save energy and to prevent the oil from charking and aging caused by one-off and high-speed heating. 2. Air cooling system could cool the oil in a short time thus avoid of the waste of water resource caused by water cooling system. 3. Removal of water/gas system. The technology of multiple distillation is used to remove water and gas from oil . The water and gas could be completely removed under the condition of depression vacuum and 80 centigrade of temperature. 4.Three layers of filtration. Filter cloth/pater and filter cartridge are comprehensively used to filter impurities with vassarea and high accuracy. Filter cloth/paper is low-cost, availabe and easy to be replaced. 5. Function of decoloration. Its particular function is to decolor black oil to new oilby means of addingacid andactive white claywithout any bad smell nor pollution to the environment. The colority of the regenerated oil can reach the international new oil standard. 6. Material.It is made of steel plate with three millimeter thickness to preventagainst great pressure under the heating condition, toguarantee the safety and to extend theuseful lifeof the machine. 7. Single large tapered tank. low cost, great cubage and no blind angle. 8. Koke and residual carbon could be completely removed and the quality and cleanliness of the regenerated oil could be improved. 9. Automation of spraying sulfuric acid and water reduces dangers caused by manual operation. 10. The acid sludge resulted by pruduction could be recycled and reused without pollution to the environment. Technical Specification ModelTSJ-2000Rated Flow, L/min120Capacity, Kg/d(8h)4000Vacuum Degree, Mpa-0.06 -0.098Temperature Range, °c80-100Oil Pump Pressure, Mpa0.4Noise, dB(A)50Total Power, KW172Dimention, mm11350×3400×4200Weight, Kg9000InstallationFixed Regenerated Oil Standard Visosity, mm²/sGB443-89 StandardFlash Point, °c≥GB443-89 StandardPour Point, °c≤-5Acid Value, mgOH/gNoWater Content, %NoImpurity, %GB443-89Copper Corrosion, (100°c, 3h)≤1Colority≤SH/J