MSB horizontal single-stage centrifugal pump

Stainless steel horizontal single-stage centrifugal pump • MSB series of pump is single-stage centrifugal pump and features axial suction and radial discharge • Compact structure, the pump is directly connected with the motor, coaxial installation • Convenient installation, screw thread water inlet and outlet • Light weight, thin plate pressing structure for main parts and components • Corrosion resistance, components passing the flow use AISI 304 or AISI16 stainless steel. Application • IPressurization and pumping of industrial and civilian clean water or other liquids • Water treatment • Water circulating system • Agricultural irrigation • Other fields Pumping liquids • thin, clean, non-flammable and non-explosive, not containing the liquid with solid particle and fiber • Able to transmit light corrosive medium ( have a bearing on the content of chloride ion in the medium, thickness of acid or alkali, whether generate corrosion on the rubber and mechanical seal materials) • The density of transmitted medium is less than that of clean water, viscosity close to that of water. Otherwise the motor of large power is required. • Liquid temperature: -10°C-+85°C • Ambient temperature: up to +40°C • Altitude: up to 1000m • Max. Pressure of the system is 8bar. Installation requirements • The pump shall be fastened on the stable horizontal base • The installation of the pump shall ensure that the pump will not be influenced by the tension of the pipeline • The pump shall be installed on the ventilating and anti-freezing place to ensure normal operation of the motor • Electric wiring device shall guarantee that the pump will not be damaged by lack of phase, unstable voltage, current leakage and overload. Curves Include performance curve in the technical data: • All curves are based on the measures value of motor 3*380V, under the constant speed of 2850rpm • Measurement is done with 20°C air-free water, kinematic viscosity of 1mm²/sec • Curve tolerance in conformity with ISO9906,appendix A • The operation of pump shall refer to the performance region to prevent overload of motor due to too large flow rate. ModelPower (kw)Q (m3/h)1.52.53.54.567891012151820222427MSB60/0.370.37H (m)18.417.21511.8MSB60/0.550.5523.622.120.217.3MSB60/0.750.7529.327.72623.6MSB100/0.550.5519.318.816.613.912.410.3MSB100/1.11.129.22826.823.221.418.516.3MSB160/0.750.7516.716.215.715.414.913.613.5MSB160/1.11.12019.41918.818.317.816.7MSB250/1.11.118.31817.717.417.216.214.212.1MSB250/1.51.524.424.223.723.322.722.219.216.7MSB250/2.22.228.127.927.3627.226.825.924.422MSB330/1.51.520.219.819.619.318.717.616.214.813.411.5MSB330/2.22.223.523.222.822.521.820.518.917.716.414.712