MS9 Emulsified Bitumen Slurry Sealing Machine

MS9 Emulsified Bitumen Slurry Sealing Machine

jelly guo
Contact person

Basic Information

MS9 Emulsified Bitumen Slurry Sealing MachineMS9 emulsified bitumen slurry sealing machine is developed, designed, and manufactured by XRCMC itself, which based on absorbing overseas advanced technology and having advance world level. This machine mainly uses for emulsified bitumen slurry sealing construction of preventable maintenance of first-class highway, and also can be used for slurry sealing, modified slurry sealing and cold material mixing. High efficiency and easy of recycling fund will be realize when use this machine. 1. Specification of MS9 emulsified bitumen slurry sealing machine Chassis Customer can choose the chassis from following listed: (1) Steyr 1491.280/k38/6×4(appropriative) (2) North-Benz 3229K/ 6×4(appropriative) (3) North-Benz 2629K/ 6×4(appropriative) Fuel: diesel oil Break: air break Max. Full-load weight: 32000kg Front axle load: 7500kg Rear axle load: 13000 kg×2 Reservoir capacity: 200L(diesel oil) Front and rear tyre/rim: 12.00-20/8.5-20 Specification of charging device: Aggregate bin capacity (m3): 8.6 Emulsified bitumen tank capacity (m3): 2.7 Water tank capacity (m3): 2.3 Mineral fine material bin capacity (m3): 0.35 Fiber bin capacity (m3): 0.35 Additive tank capacity (L): 230 Engine model: DEUTZ BF4L913 wind-cooling, rated power: 74kw/23rpm Mixer production capacity(kg/min): ≤2500 Paving speed(km/h): 1.6 Fluid driving stepless extensional paving hopper Model: MS9-3800 (standard positioning) Paving width (m): 2.5-3.8 Model: MS9-4000 (selective pairing) Paving width (m): 2.6-4.0 Fluid driving mechanical broaden paving hopper Model: NT-4000 (selective pairing) Paving width (m): 2.8-4.0 2. Technical characteristics of MS9 Emulsified Bitumen Slurry Sealing Machine Aggregate system Aggregate bin: 45°side wall, 45°back wall; reinforced bin top; the space between bin and conveyer belt is sealed by rubber. Vibrator: located in central bin, DC electric control. Measure: readable gauge and locking device; counter. Water system Water tank: double welding flange rim angle, top inspection hole, level gauge, and antiseptic treat with special fiberglass inner. Duct system: inhibited line pipe, valve and fitting, replaceable filter screen. Measure control: console controlled solenoid valve, metering valve, and digital flow meter. Pump: high speed and high power capacity super-centrifugal pump. Sparge pipe: ON/OFF control by console; adjustable control valve of flux, truck full width spray. Flexible conduit: 2 pistol lances, 1 high-pressure lance, they are all located two side of console. Emulsified bitumen system Bitumen tank: double welding flange rim angle, top inspection hole, cleaning hole and level gauge located on side. Pump: variable pump run with large capacity low-speed to protect the flow of emulsified bitumen, which with the function of load emulsified bitumen. Directional control: console controlled pneumatic three-way valve, ON/OFF relay adjustable. Measure: Forward displacements pump calibrating measure; electric sensor and digital display system for selective. Pipeline cleaning: water cleaning Filler and fiber system(selective pairing) Bin: larger angle slope lateral wall, overhead mixer, cleaning door. Feeding system: continuing screw distributor, ON/OFF and back-gating, the 2 bins can feed individually. Measure: console controlled speed changeable distributor, gauge. Additive system Additive tank: 230L stainless steel tank. Pump: stainless steel, forward replacement. Measure surveillance: console controlled changeable pump speed, glass flow meter, electric sensor and digital display system for selective. Measure and monitoring Measure: all material feeding is connected at the same variable speed shaft to ensure the continuing measure of all feeding. Monitoring: all counters can return to O. Mixer system Mixer: wear-resistant body, reversing twin shaft mixing, adjustable angle of blade. High strength bolt connect with stop nut, and the blade easy to replace. No mixing dead angle, hydraulic motor driving, and the synchronizer ensure the same speed of two shafts. The mixer cover is hydraulic opening. Feed appliances: console hydraulic control, left-middle-right feeding is allowed. Engine system Engine: DEUTZ 4cylinders wind-cooling diesel engine, 74kw, firing. Fuel pump connected with oil box of chassis. Accelerator: mechanical accelerator pedal, pneumatic servo accelerator pedal is selective paring. Operation and control system Operation control: (H) hydraulic control, (E) electronic control, (M) mechanical control, (EH) electronic-hydraulic control, (P) pneumatic control. Mixer: speed (H), ON-OFF-REVERSE (H), slurry feeder (H), cover ON-OFF (H), mixer leveling, up-down (H). Feeding clutch shaft: speed (H), ON-OFF (H). Aggregate feeding: bin gate opening (M), counter (E), OFF- ON (EH), vibratos ON-OFF (E). Filler, fiber: helix speed (H), counter (E), ON-OFF-REVERSE (H). Additive: pump speed (H), counter (E), flow meter (E), OFF- ON (H). Water and emulsified bitumen: pump flow rate (M), flow meter (E), OFF- ON (E), counter (E), pump OFF- ON (EH), internal circulation (EH). Sparge pipe: flow (M), OFF- ON (E). Paving hopper: screw distributor speed (H), OFF/LEFT/RIGHT (H), elevating (H), hauling (H), transverse moving, lift-middle-right (H). Feeder button: OFF/ON (E) Auto feeding sequence: PLC control (E) Driver signal: Klaxon (E) Engine: accelerator (P), rear accelerator (P), tachometer (E), timer (E), ammeter (E), spark lighter (E). Hydraulic system Oil box and cooling: large capacity oil tank, incidental cooler of engine, liquid level thermometer, and cleaning door. Filtering: oil box filter, reflux line. Pump: plunger pump droved filler feeding system, additive pump; triple gear pump droved clutch shaft, mixer, screw distributor of paving hopper. Control: control valve or electronic-hydraulic valve can satisfy all the required function. Power supply: 24v, 150AH×2 battery cell. Electric control: PLC, soft connection, less failure. Automobile chassis (parameters must accord with the following requirements): Shaft quantity: 3 Front axle load: ≥7500kg Twin rear axle load: ≥13000 kg×2 Engine rated power: ≥150kw Wheel-base: 3800mm Mix. Working speed: 1.5-1.8km/h

Delivery terms and packaging

Unfortunately the seller did not specify the terms of delivery. For more information, contact the seller.

Payment term

Letter of credit

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product