mould resistance color tile grout

mould resistance color tile grout,tile grout,tile adhesive Features: 1, Green environmental protection, non-toxic, no peculiar smell 2, Excellent flexibility 3, Good anti-pulverization property 4, Not easy to crack, remarkzble anti-permeability capacity 5, High-density, anti-break Scope: Applied in wall of indoor and outdoor, floor mosaics, filling ceramic tiles and stone (DB301-1-Small 1-3mm) (DB301-2 STANDARD 3-8mm) (DB301-3 Wide 8-15mm) Requirement of base level 1, Ensure that the gap prepared to fill is clean, no debirs, stagnat water and other loose materials. 2, Ceramic tiles with high water absor-ption such as bricks and cleft bricks, the gap of which should be fully wet by water before filling 3, Tile products should be used in 5-40°C 4, Don’t clean it with acid fluid which concentration is over 3%, use pplenty of water to wash after cleanout. 5, The filling materials may contaminate the surface of tiles, especially the rough and porous tiles and all types of natural stone, marbles, should be strictly in accordance with the provisions of the instruction to operate when construct, timely clean-up, if necessary, do partial test firstly, the company does not undertake any responsibility for the pollution on the surface of tiles by filling materials caused by improper operations 6, As the influence of construction conditions(temperature, humidity, etc.) or the ration errors, the final discrepant with the standard color board, but does not affect the produce performance. ,