Microsilica Fume

Hammer ® - Microsilica FumeMicrosilica Fume, also known as silica fume, is a very fine pozzolanic material, composed of amorphous silica produced by electric arc furnaces as a by-product of the production of elemental silicon or ferro silicon alloys, which can be used in a variety of cementitious products such as concrete, grouts and mortars as well as elastomer, polymer, refractory, ceramic and rubber applications. very high specific surface area (min.15000m2/kg)very high content of amorphous silicon dioxide (SiO2: 80% - 97%)very efficient filler (average particle diameter is 0.15microns, about 100x smaller than cement)very reactive pozzolan Xiamen Bentonite International Corporation (XBIC), as a professional supplier of Microsilica Fume, has established long-term partnerships with several large-scale ferrosilicon and silicon metal factories in China, and set up standardized equipments to collect and densify microsilica for many years. Our annual output of Hammer ® Microsilica Fume is nearly 100,000mt, which is produced in conformance with the ASTM C1240 specification, and the quality is controlled and monitored throughout the entire production process to ensure that it meets or exceeds the specification requirements. The SiO2-content ranges from 80% to 97%, and our Microsilica are classified as follows: Hammer ® - Microsilica Fume D80 SiO2: 80% - 85% Bulk Density: 550 - 700kgs/m3Hammer ® - Microsilica Fume D85 SiO2: 85% - 88% Bulk Density: 550 - 700kgs/m3Hammer ® - Microsilica Fume D88 SiO2: 88% - 90% Bulk Density: 550 - 700kgs/m3Hammer ® - Microsilica Fume D90SiO2: 90% - 93% Bulk Density: 550 - 700kgs/m3Hammer ® - Microsilica Fume D93SiO2: 93% - 96% Bulk Density: 550 - 700kgs/m3Hammer ® - Microsilica Fume D96SiO2: 96% - 97% Bulk Density: 550 - 700kgs/m3 Chemical Composition ASTM C1240EN 13263: 2005JIS A 6207: 2000GB/T 21236: 2007SiO2 min. 85.0%min. 85.0%min. 85.0%min. 85.0%Al2O3 -max. 1.50%max. 1.50%-Fe2O3 -max. 2.00%max. 2.00%-CaO+MgO -max. 2.00%max. 2.00%-K2O+Na2O -max. 2.00%max. 2.00%-C ---max. 2.50%Cl -max. 0.30%max. 0.10%max. 0.30%pH --4.00 8.50-Loss on ignition max. 6.00%max. 4.00%max. 5.00%max. 6.00%Moisture content max. 3.00%-max. 3.00%max. 3.00% Physical Properties ASTM C1240EN 13263: 2005JIS A 6207: 2000GB/T 21236: 2007Specific surface min. 15.0m2/gram15.0-35.0m2/grammin. 15.0m2/grammin. 15.0m2/gramBulk density ---550 700kgs/m3Percent retained on 45μm sieve max. 10%--max. 10.0%Pozzolanic activity index at 7 days min. 105%-min. 95%-Pozzolanic activity index at 28 days -min. 100%min. 105%min. 85%Ratio of water demand ---max. 125% Packaging Hammer ® - Microsilica Fumeis supplied in uv-proof and aging-resistant jumbo bag according to GB/T10454 and EN ISO 21898, which is suitable to be stored in a severe environment for long term. Packed in 900kgs jumbo pp bag with pe liner (2bags on a pallet).20bags / 10pallets (18mt) into 1 x 20ft.container