Metal flux Titanium Additives (75Ti5Al)

Features: • 75% Ti content, replacing Al-Ti alloy, the amount of small, dramatically reducing the cost of ingredients. • easy to use, measurement is simple, accurate composition control. High-titanium alloy most suitable for the preparation, Such as the A356, ASTG06 (France), HS2 (Japan), ZL201, ZL205 and so on. • The activity of titanium added, the formation of small uniform TiAl3 phase, avoiding the use of intermediate alloy Titanium prone to segregation and inclusion into the phenomenon. • preservation of the longest patent formulations, proper use, paid more than 90%. • no contamination of molten aluminum on the aluminum melt with purification. • Save on more than twelve months (stored in a dry place.)Usage: • adjusting the temperature of liquid aluminum above 730 °C, the optimum temperature of not less than 750 °C. Warm hearth titanium agent. • Grilled net aluminum surface scum, the input block preheated titanium agent, stirring until the complete response to (About 3-5 minutes). • Under normal circumstances, should be cast into the way in refining before adding better, as far as possible in the aluminum Ingot melting, the Si-Mg was added before input to ensure adequate dissolution of titanium diffusion time.Use points: temperature, time, stirring.Size: Each 500 grams weight titanium agents, each 375 grams solid titanium.Packing: carton packaging, each box of 20kg, bag 2kg.