Melt blown filter element

Melt blown filter element Melt blown filter element Its element is tubular in shape and made by heating, melting, spinning, pulling, and molding with nontoxic and tasteless polypropylene particles. It is not only used in water purification, but also used to filter strong acid, lye and organic solvent because of its wide chemical compatibility. This element has large dirt holding capacity, long service life and low expenses. Filter accuracy: 1µm,3µm,5µm,10µm,20µm,30µm,60µm Workable PH: 1-13 Max. press loss:+ 0.4Mpa Working temperature: 70°C when the press is lower than 0.25 MPa Sterilization: 126°C sterilization in 30 min Endotoxin: endotoxin is less than 0.5 EU/ml after IAL testing of extract liquor in the filter. Application fields: Medicine industry: pre-filtration of injection, liquid medicine, injection washing water, infusion as well as a variety of antibiotics and traditional medicine injection. Food industry: filtration of alcohol, beverages, drinking water. Electronics industry: filtration of pure water and ultra-pure water. Petroleum and chemical industry: filtration of a variety of organic solvents, acids, lye and oil field water. Structural classification: with a skeleton, without a skeleton and caps at both end or not. Product specification length: 10 ",20",30",40"