Manual Call Point J-SAP-120 fire alarm

J-SAP-120 Technical Parameters Operating IntustrationManual call pointJ-SAP-120Rated voltageDC24VMaximum current8AColourredWeight245gContat resistance≤0.5ΩTemperature-10°C +50°CSize120*80Shaperound J-SAP-120 is a kind of universal manual call point according to the GA5-91 standard. It has simple structure, well-designed, easy to install, reliable quality characteristics. It can be widely used as an alarm start switch of fire alarm systems in buildings, or as a switch on other special condition. J-SAP-120 manual call point is easy to operate. when the fire happen, just need to press the round part in the middle of the panel, and it can send the fire signal to the alarm host system. At the same time, the LED on the manual call point shines, which shows the manual call point has being work. In addition, push the rectangular plate on the panel up, and insert the fire intercom phone into the corresponding hole, and then talk with the alarm host system. Push up the reset button beside the phone jack to cancel the fire alarm signal.