Made-to-Order Multi-fiber PVC Single-ply roof wate

“Multi-fiber PVC Single-ply roof waterproofing membrane” products have been developed on the basis of“Multi-fiber & enhanced PVC waterproofing membrane” created and devised by Shanghai Zanke Anti-leakage Technology Co,.Ltd. Its research standardsadopt the standards of ASTM D4434-2006 of U.S. This waterproofing system is applicable to a variety of roof structure, which haslight weight, waterproofing, airtight insulation, faster construction, easy maintenance, rich aesthetic color, windproof and tearproof ,environmental protection, especially the significant reduction in cost advantages of integrated roof construction. the construction materials and components have been confirmed by the Shanghai Quality Supervision, Inspection and Testing Station determination. There are two types of this product. Type I follows the Quality Standard DIN 16734-86. Type II is higher than the Quality Standard DIN 16734-86. Please see detail below. No. SpecificGB12952-2003ASTM D4434-2006Q/SSTV 3-2008Type IType IIType IType II1Performance of Tensile Tensile Strength≥100N/cm≥160N/cm≥35kN/m≥35kN/m≥48kN/mElongation Atrupture≥150%≥200%≥15%≥15%≥25%2Tearing-rupture Force—≥200N≥200N≥400N3Bending & folding performance at low temperature-20°C,1h No crackle-30°C,1h No crackle-40°C,4h No crackle-40°C,4h No crackle-40°C,4h No crackle4Rate of change of dimension under heat ageing(80±2) °C,24h,≤1.5%(80±2) °C,24h, ≤1.0%(80±2) °C, (1344±1)h ≤0.5%(80±2) °C,(1344±1)h≤0.5%≤0.5%5Retention rate after heat treatment Tensile Strength—≥90%≥90%Elongation Atrupture—≥90%≥90%6Joint strength≥6.0N/mm or failure of roll≥75% or failure of rollThe roll breaks beyond joint7Absorbent—(70±1) °C, 168±1h, ±3.0%(23±2) °C, 168±1h, ±3.0%8Penetration resistance0.5Kg,300mm No water penetration0.5Kg, (23±1) °C No water penetration0.5Kg, (23±1) °C No water penetration9Speed-up ageing treatment under artificial weatherRadiation energy:2,000MJ/square meterRadiation energy: 10,000MJ/square meterRadiation energy: 10,000MJ/square meterThe requirement is the same as the above.(63±2.5) °C,24h No crackle(63±2.5) °C,24h No crackle(63±2.5) °C,24h No crackle