Load Break Switch

Specifications SKG1load isolation switch: 1.Rated voltage up to 1500V. 2.Divide into front direct operation and outside cabinet operation. SKG1 Series load isolation switch: SKG1 load-isolation switch can operate under the following conditions: Altitude not more than 2000m The range of ambient temperature is from 5centidegree to 40centidegree Relative humidity not more than 95% The environment without any explosive medium. The environment without any rain or snow attacking. Note :If the product is expected to be used in the environment where temperature is over +40centidegree or below -5centidegree -45centidegree,users shall tell it to the manufacturer. Application: AC 50Hz, rated voltage up to 1500V, DC rated voltage up to 5000V. Used for isolated power supplies, disconnect the high-voltage high maintenance equipment and electrification equipment, among them there is a clear break point can be seen in. The isolating switch act in concert with the circuit breaker, According to the needs of the system operation mode switching operation to change the wiring connection of system operation. Used to connect or disconnect a small current circuit. Operation mode: Direct operation: The handle is installed on the middle of switch directly. Operate outside of cabinet: The handle is installed on the door of distribution cabinet. It can be assembled two groups auxiliary contacts.