line marker spray paint

We have a wide range of paint coating products for the inside and outside surfaces of steel and aluminum easy open ends (EOEs), and steel food cans, with high food hygiene safety regulations. Line Marker Spray Paint 1 Item No.:S1280A-B 2 Usage:Easy Open Ends 3 Package:16KG/14KG per drum 4 Delivery Time: 7-15 Days Product DescriptionLine Marker Spray PaintItem No.S1280A-BUsageExternal Mending Coating for EOE ReticleSubstrateTinplate, TFSViscosityA: 60±10Sec; B: >12Sec.(Ford 4#/25°C)SolidA: 45±2%; B: 35±2%LubricantIncludedThinner/ Cleaner2-Butanone, n-Butyl acetateCuring Temperature100°C/5Min.,Curing 24h in normal temperature 25°CMixing ScalA/B:4:1Film ColorClear Benefits with our Line Marker Spray Paint for Easy Open Ends: 1) Apply on the exterior reticle of steel EOEs 2) Shorter time and lower temperatureof curing 3) Good performance of compactness and rust-proof 4) High performance of steaming and scratch resistance 5) Mixing Scale: A/B 4:1 Notes: 1) Shelf life: 6 months after production date 2) to smooth coating for production, enough stirring in 30 minutes before use 3) Store below 5-35 degrees celsius, avoid direct sunlight and excess chill Suzhou 3N Packaging Coatings Co., Ltd has been committed to the development of new coatings with BPA free for almost 3 years. And now we have a series of coatings for metal food packaging with BPA free. Clear and gold polyester resin coatings for the exterior of dried food cans, beverage cans and tops & ends of food cansOrganosol coatings or polyester resin spraying coatings for the interior of 3-piece beverage cans, organosol spraying coatings for 2-piece cansWhite or aluminized organosol coatings for the interior of food cans and EOEs.Aluminized mold release organosol coatings for luncheon meat cans (polyester resin coatings can be used as base coating for the side-stripe of 3-piece cans )Clear, white, aluminized or mold release organosol coatings for the internal side-stripe of 3-piece cans, and clear acrylic resin coatings for the exterior.Organosol coatings for the interior of EOEs in aluminum sheets and coils, and clear polyester resin coatings for the exterior.White organosol coatings for the interior of lug caps, with PVC closuresOrganosol adhesive coatings for crown caps Our organosol coatings have solved the migration issues of PVC, and in compliance with all the safety regulations from domestic and overseas. The coating process is similar to the traditional process, but the curing condition is 185°C*12mimutes. The solid of organosol coatings is between 45% and 60%, coated once for general application. All the products are in high cost performance and competitiveness.