Place of Origin |
Zhejiang China (Mainland) |
Brand Name |
YuWang |
Model Number |
SJK-330 |
led bulb This series of products using the new ABS shell, high-brightness LED lamp beads, elegant exterior design, high-quality lead-acid batteries, adequate capacity, charge and discharge time of up to 300 times or more. Improved circuit design, has overcharge and over discharge protection to ensure longer lamp life. Optional remote control, autonomous control using infrared light remote control switch, use the more convenient. Specifications:1,Operating voltage: AC110-240V, 2,Infrared remote control, the effective distance of 10 meters. 3,Size: 132 × 135CM Note: (Please check before buying lamp type, select the appropriate type of lamp holder lamp --B22/E27 optional)This product is only suitable for indoor use, in the use and storage process to ensure that water, moisture, shock and keep the lamp upside down. Installation, replace the product and switch the switch on the lights to ensure that cut off the power before the stall. Do not use direct observation of the eyes light lamps. If long-term not use this product every three months to one charge, and not less than 8 hours per charge. This product can not be used in dimming circuits. This product requires operating temperature 0-40 °C, over this range, which may shorten the lamp life and even damage to the lamps. Disassemble the product without permission is strictly prohibited and, if necessary, please send your dealer or designated repair handled by professionals. Help1. Product switch has three modes: AC, OFF, DC.2. Infrared remote control available general household appliances, such as TV, refrigerator, air conditioning, the infrared remote control.3. Stall features instructions:3.1. When the lamp is installed in the lamp holder and mains connection:3.1.1. "AC" Stalls: remote control light switch, light is both mains and battery power; such as electricity or power off, lights automatically switch to a state of emergency battery powered lights remain lit, Remote does not work this time.3.1.2. "OFF" gear: battery charging, LED lights, but the state no overcharge protection, long-term charging will damage the battery and lights.3.1.3. "DC" Stalls: remote control light switch. Remote Control turn off the lights, the charging indicator light, battery charging, this state has for overcharge protection, long-term charge; remote control turn on the lights, the joint municipal electric power supply and battery; this gear such as cutting off electricity or power outage, Whether lights are on or off before the power failure state are automatically converted to a state of emergency lights, this time a battery-powered, remote light switch.3.2. When the independent use of light (not connected to mains) when:3.2.1. "AC" Stalls: remote control light switch, battery power supply.3.2.2. "OFF" gear: lights not working.3.2.3. "DC" stall: Can not remote control, lights remain lit, the battery power supply.4. Remote control battery voltage is too low will result in failure, will switch to the OFF position and then connected to electricity, charge about 1 hour, and then disconnect the electricity, and immediately appropriated DC file and electricity connected remote control function can be restored .5. In the state to use remote control lamp, please note to avoid other interference with infrared remote control home appliances.6. Long-term lighting is not used, please cut off the electricity and lights switch to "OFF" position.