LED Daytime Running Light/LED DRL Light

Specification : 1). Product Name : LED Datetime Running Light (LED DRL) 2). Certificate : DRW, Emark 3). Whole Kits Including : Two LED Lamps(Left One and Right One),Wiring, Gift Box,Manual Lamp Parts : Electronic Circuit Board , Viewfinder , Wiring, Lamp Hull and Housing Technology Parameters : 1). Working Voltage : DC12V/24V 2). Working Current : 0.88A and 0.44A 3). Power Consumption : 10.56W 4). Surface Temperature : ≤ 50 LED Bulb Technology Parameters : 1). Color Temperature : 6000K,7000K 2). Working Current : ≤ 300 MA 3). Current Stablity ≤2MA 4). 70 90LM Electronic Protection : 1). High-Voltage Protection The Control System Will stop Working Automatically To Protect the Control Module From Damage when the Power Voltage is Higher Than 15.5V,then LED Light Only Works by the Outer Power Directly 2). Low-Voltage Protection: The LED Light Will Shut Off to Protect the System once the Votage is Lower than 9V 3). Lose-Frequency Protection : The LED Light Shut Off Once the Control Frequency is Abnormal to Protect the Control Module and Led Light 4). Wrong-Connection Protection It is no Harmful to Circuit when the Three Cables of LED Were Connected Incorrectly.The LED Light is off When Connection is Correct, it will be on When Connection is Right.The Three Cables of LED Light are VBB,Vss and VC Respectively. Other Characters: 1). Anti- Vibration The Anti-Vibration Character of the LED DRL is accord with the Requirements of the Automotive Relevant Technical Specifications, 2). Waterproof and Corrosion-resistance : The Waterproof and Corrosion-Resistance of the LED DRL is Accord with the Requirements of the Automotive Relevant Technical Specifications. 3). Appearance The Appearance of the LED DRL hasn’t Obvious Depression,RIP,Deformation.And it has clean and Smooth Surface without Burr,Litht Scratches,Dirt,Bubble,Such as no more than 3pcs.There are not Obvious White Granules Inside the Light Housing and Viewfinder. 4). Packing The Whole Kits Should Include Lef LED Light and Right LED Light. One Cable Assembly,Two Metal Hasps for Installing.All Parts are Placed into Three Inside Small Boxes with a Manual Installation. Specification : 1). Product Name : LED Datetime Running Light (LED DRL) 2). Certificate : DRW, Emark 3). Whole Kits Including : Two LED Lamps(Left One and Right One),Wiring, Gift Box,Manual Lamp Parts : Electronic Circuit Board , Viewfinder , Wiring, Lamp Hull and Housing Technology Parameters : 1). Working Voltage : DC12V/24V 2). Working Current : 0.88A and 0.44A 3). Power Consumption : 10.56W 4). Surface Temperature : ≤ 50 Electronic Protection : 1). High-Voltage Protection The Control System Will stop Working Automatically To Protect the Control Module From Damage when the Power Voltage is Higher Than 15.5V,then LED Light Only Works by the Outer Power Directly 2). Low-Voltage Protection: The LED Light Will Shut Off to Protect the System once the Votage is Lower than 9V 3). Lose-Frequency Protection : The LED Light Shut Off Once the Control Frequency is Abnormal to Protect the Control Module and Led Light 4). Wrong-Connection Protection It is no Harmful to Circuit when the Three Cables of LED Were Connected Incorrectly.The LED Light is off When Connection is Correct, it will be on When Connection is Right.The Three Cables of LED Light are VBB,Vss and VC Respectively. Other Characters: 1). Anti- Vibration The Anti-Vibration Character of the LED DRL is accord with the Requirements of the Automotive Relevant Technical Specifications, 2). Waterproof and Corrosion-resistance : The Waterproof and Corrosion-Resistance of the LED DRL is Accord with the Requirements of the Automotive Relevant Technical Specifications. 3). Appearance The Appearance of the LED DRL hasn’t Obvious Depression,RIP,Deformation.And it has clean and Smooth Surface without Burr,Litht Scratches,Dirt,Bubble,Such as no more than 3pcs.There are not Obvious White Granules Inside the Light Housing and Viewfinder. 4). Packing The Whole Kits Should Include Lef LED Light and Right LED Light. One Cable Assembly,Two Metal Hasps for Installing.All Parts are Placed into Three Inside Small Boxes with a Manual Installation.