Lead acid VRLA battery 2V300AH for solar/wind ener

Nominal voltage: 2V Nominal capacity: 200Ah (10-hour rate) Dimensions: 171*150*330*365mm Approximate weight: 19.5kg Capacity: (25 degree Celsius, 1.75V/cell) Terminal: Copper or PbLong service life: 12 years design lifeThick plate design ABS case (can be made with flame retardant V0) Wide operating temperature range VRLA Battery Performances Non-spillable With use of an absorbed electrolyte technology,and the separators, coupled with the use of special sealing epoxies, and long sealing paths for posts, SANTAKUPS VRLA batteries have exceptional leak resistance. Explosion Proof With advanced safety valve system and special filter, SANTAKUPS VRLA batteries could prevent the chance of battery explosion and ensure complete safety in normal use. Sealed and Maintenance-free Operation There is no corrosive gas generation during normal use and no need check the electrolyte or additional water adding during battery's service life. High Quality and High Reliability SANTAKUPSVRLA battery has stable and reliable capacity. The battery can withstand overcharge, over discharge, vibration, and shock. The batteries are 100% tested on production line for voltage, capacity, sealing condition and the safety valve which are 100% visually inspected before the final assembly process. Low self-discharge lower that 3% of rated capacity per month under normal operationg temperature Flexibility Design SANTAKUPS VRLA batteries could be used in series or parallel to give wide range of voltates and capacities for variety of applications.Convenient for installation and operating in any position. Low self-discharge lower than 3% of rated capacity per month under normal operating temperature Certification UL,CE,FCC,ISO9001 approval