LC1-D series ac contactor

CJX2(LC1-D)series AC contactor CJX2(LC1-D) series AC contactor is designed for long-distance making and breaking in circuit , frequently starting and controlling AC motor in the power system with frequency of AC 50Hz(or 60Hz),rated operating voltage up to 660v,and rated operating current up to 620A under category AC-3.It also can work as electromagnetic starter to protect the circuit against overload if assembled with appropriate thermal relay or electronic protective device. CJX2-F(LC1-F)series AC contractor CJX2-F(LC1-F)series AC contractor(hereinafter abbreviate to contactor)is designed for making and breaking in main circuit, frequently starting and controlling AC motor in the power system with frequency of AC 50 Hz(or 60 Hz), if equipped with special coil, the frequency can be 40 400Hz, rated operating voltage up to 630v, It can be used in various electrical equipment, electromotor and circuit control if assembled with appropriate reply or other general electrical appliance. In addition, it can work as mechanical interlock contactor equipped with auxiliary contactor group, air delay head and mechanical interlock, or electromagnetic starter with appropriate thermal relay. CJX2(LC1-D)four-pole AC contactor CJX2(LC1-D)four-pole AC contactor is designed for long-distance making and breaking in circuit, frequently starting and controlling AC control electromotor in the power system with frequency of AC 50Hz(or 60Hz), rated operating voltage up to 380v, and rated operating current up to 620A under category AC-3. It can work as electromagnetic starter assembled with appropriated thermal relay or electronic protective device in order to protect circuit from overload. Used in various electrical equipment, electromotor and circuit control if assembled with appropriate reply or other general electrical appliance. In addition, it can work as mechanical interlock contactor equipped with auxiliary contactor group, air delay head and mechanical interlock, or electromagnetic starte with appropriate thermal relay, The products comply with IEC947-4-1 and GB 14048.4. CJX2-K(LC1-K) series AC contactor CJX2-K(LC1-K) series AC contactor is designed for long-distance making and breaking in circuit, controlling the electromotor to start, operate, reverse or atop, which is used in the power system with frequency of AC 50 Hz or 60 Hz, r voltage up to 660v, and rated operating current up to 12a.It can protect the circuit against overload assembled with appropriated thermal relay. The products comply with IEC947-4-1 and GB14045.4. CJX2-E(LC1-E)series AC contactor CJX2-E(LC1-E)series AC contactor (hereinafter abbreviate to contactor) is designed for long-distance making and breaking in circuit, frequently starting and controlling AC control electromotor in the power system with frequency of AC 50 Hz (or 60 Hz), voltage up to 660v, and current of 9A and below. Assembled with auxiliary contactor group and appropriate thermal replay, it can protect circuit from overload.