L-one-tube spiral Teflon (PTFE) heater

L-one-tube spiral Teflon (PTFE) heaterWATTSWOLTS (See pg 1)HOT ZONE IN/(mm)OVERALL LENGTH In/(mm)MAX COLD ZONE In/(mm)MODEL NUMBERSHIP WGT Lbs/(kg)50012061241HXL5106-R*-**6240(155)(305)(1040)HXL5106-R*-**(2.5)100012081241HXL1108-R*-**7240(205)(305)(1040)HXL1208-R*-**(3.5)2000120121740HXL2112-R*-**8240(305)(460)(1015)HXL2212-R*-**(4.0)480HXL2412-R*-**3000240171840HXL3217-R*-**13480(430)(460)(1015)HXL3417-R*-**(6.0)4000240201840HXL4220-R*-**15480(510)(460)(1015)HXL4420-R*-**(7.0)5000240241836HXL5224-R*-**18480(610)(460)(916)HXL5424-R*-**(8.0)6000240291830HXL6229-R*-**21480(735)(460)(760)HXL6429-R*-**(10.0)8000240371832HXL8237-R*-**26480(940)(460)(810)HXL8437-R*-**(12.0)9000240441835HXL9244-R*-**29480(1120)(460)(890)HXL9444-R*-**(13.0)Please marked the length(inch) behind the “R”, such as:HKL2212-R24-PTL.Only single-phase is available,if require can be lengthen vertical length or use flexible riser.Product Features1.Adopt titanium, zirconium, SUS304 and SUS316 stainless steel to make, divide into vertical and heated at the bottom of "L", "Z" shape.2.According to the installation location , the chemical liquid’s nature, solid matter deposit characteristics in liquid to design the surface power of heat tube and decide the Tube diameter. Diameter general specifications: ø11mm,ø17mm,ø25mm,ø30mm,ø32mm,ø45mm,ø50mm.3.ø11mm, ø17mm tubes are shrinking tube heater, liquid heating, heat pipe surface power 5.6W/Cm2, apply to the mobility, and less solid Body deposition, Liquid does not precipitate in the heating surface of the liquid crystal heating after cooling.4.ø45mm diameter series products adopt low surface power design.5. Have 120V single-phase voltage, 220V, 380V, 220V three-phase, 380V three-phase, power from 0.5KW to 140KW.6. All heaters can be ancillary use with over-temperature protection switches and temperature probe.7. All heaters are adopt international inspection standards and ensure the electrical safety