K11 Flex Waterproofing Slurry

K12Flex Waterproofing Slurry TECHNICAL CHARACTERISTICS 1.Two components eliminate risk of incorrect mixing ratio.2. Seals lightweight aerated blocks3. Seals precast joints4. Anti-carbonation protection5. Non-toxic6. Will not attack metal7. No protection require prior to fixing other types of finishes8. Efflorescence-free surface waterproofer with elastic properties9. Suitable for areas of potential cracking WHERE TO USE 1) External areas parking deck, planter boxes, sealing precast joints and intersection of two concrete elements. Protection to lightweight blocks, hollow blocks, aerated blocks. Anti-carbonation protection.2) Waterproofing hydraulic channels, faces of dams and basins.3) Waterproofing retaining walls and foundations.4) Waterproofing on interior and exterior surface of wall and slab bathrooms, showers, balconies, terraces, swimming pools, water tanks etc. before laying ceramic tiles.5) Waterproofing plasterboard, render or cementitious surfaces and lightweight cement blocks.6) Flexible protection layer of new concrete structures or repaired structures subject to minor deformation under load.7) Protection of cementitious renders or concrete with cracks due to shrinkage, minor movement caused by thermal gradients or dynamic stresses due to the passage of vehicles, against infiltration of water and aggressive elements from the atmosphere.8) Protection of structures with an inadequate layer of concrete over the reinforcement rods against the penetration of aggressive elements.9) Protection of concrete surfaces which may come into contact with sea water, de-icing salts, such as sodium or calcium chloride, and sulphates.STORAGEK12 Flex Waterproofing Slurrymay be stored for 12 months in original packaging in a dry place.