jewelry display/ LED lamp

CategoryLEDSpotlight/ jewelry display lampSeriesLEDCommercial SpotlightTypeLUA2503-3WKeySpecificationsLightSource3WhighpowerLEDLumen180-270LmSize21x38x250mmShellColorSilver&BlackMaterialAluminumColorTemperatureCoolWhite:6000K;WarmWhite:3000KOtherSpecificationTheLEDcommercialspotlightscanbeusedinjewelrycounters, watchcabinets,cosmeticshowcases. Beam Angle:25°Voltage220V/110VAC--7.0VDCMax.LoadCurrent350mA/1WPower3X1WApprovedbyCE/RoHS/CCCLifespan30,000HRSWeight200g Please read the instruction carefully before you fix it. Instruction: 1)Please shut off the power before you fix it.Lamp and driver to connect the former ,contact the red and yellow line9or brown,blue)of the out-put end of the power to release the residual power.Then connect the lamp and the driver and connect high-voltage power.It is borbiden to connect the high voltage power first before connecting the lamp. 2)The input of our lamps is low pressure direct current.Distinguish the positive pole(red or brown)and negative pole(black or blue)when connect the LED driver.Please connect properly. 3)Add or reduce the bulbs in series to guarantee the LED permanent flow. Attentions: 1)Do not pull the lines too hard in order not to damage the lamp inside line. 2)Please send the whole lamp back to the factory if you have any quality problems.It is forbidden to take down any part of the lamp or there will be consequences. 3)Distinguish the input and out-put end.If the lamp burn out because of this mistake,the company does not give the repair sevice. application :