Integral Mandrel Sleeve Stabilizer

Integral Mandrel Sleeve Stabilizer Integral mandrel sleeve stabilizers are made in two parts: One mandrel and one sleeve. The stabilizer is assembled by screwing the sleeve on the body and tightening these on the shoulder. The sleeve has been engineered to avoid any accidental unscrewing as to be easily replaced on rig. Working O.D. inchmm Fising O.D. inchmmUp Conn. APIDown Conn. APII.D. inchmmFishing Length inchmmOAL inchmmRemark28 (711.2)9-1/2 (241.3)7-5/8REG7-5/8REG3 (76.2)27 (686)78 (1981)Near BitString26 (660.4)9-1/2 (241.3)7-5/8REG7-5/8REG3 (76.2)26 (660)76 (1930)Near BitString22 (558.8)9-1/2 (241.3)7-5/8REG7-5/8REG3 (76.2)26 (660)76 (1930)Near BitString17-1/2 (444.5)9 (228.6)7-5/8REG7-5/8REG3 (76.2)27 (686)67 (1702)Near BitString12-1/4 (311.1)8 (203.2)6-5/8REG6-5/8REG2-13/16 (71.4)24 (610)61 (1600)Near BitString8-1/2 (215.9)6-1/2 (165.1)NC504-1/2REG2-13/16 (71.4)27 (686)66 (1676)Near BitNC50String6 (152.4)4-3/4 (120.7)NC383-1/2REG2 (50.8)27 (686)58 (1473)Near BitNC38String5-7/8 (142.9)4-3/4 (120.7)NC383-1/2REG2 (50.8)22 (559)54 (1372)Near BitNC38String