Install the cooking with sodium hydroxide solution, adjusting-500

Preparing for the Installation of the solutions set-500 bases for the safe conduct of the process of dissolution of salts, acids, with the receipt of a predetermined concentration. QUANTUM produces MINERAL the following modifications: install the cooking with sodium hydroxide NaOH (caustic soda, lye, sodium hydroxide) Installation preparation of milk of lime Ca(OH)2 the Installation of the solution kaltsinirovannoj Soda Na2CO3 the Installation of the solution of boric acid H3BO3 the Installation of the solution, coagulating agents etc. Safe procedure preparation of the solution by setting the setting-500 Bag with ingredient manually or with the help of the bootable table the Tank is loaded in rastwornyj. Bag from the bottom, pierce the stem with a sharp tip. After that, the Tank lid rastwornyj close, hugs tight to the flange by turning the screw. The following operations are in the hermetically closed space, so there is no dusting and ensuring the safety of personnel. The storage tank is filled with the required amount of water (250-500L). The amount of water is depending on the packaging and the desired concentration of the solution. Then, a circulating pump, the water through the hand piece in the bag with растворяемым substance. The water dissolves the active ingredient and through the perforated grid back into the storage tank. The water circulation is continued until complete dissolution. After the end of the resolution (time Timer), the pump switches off. The Installation of the solution is made of chemically-resistant materials, complete with reliable shut-off valves and the pump. Possible options for the production of rastwornogo of the tank is made of stainless steel or stainless steel of mark ST3. In addition, setting-500 can be used with a loading table, a wear part and container of the desired volume, dosing pump for delivery of the solution for the consumer. The execution of the node, and the Assembly is selected depending on the needs of the customer. If necessary, QUANTUM of MINERAL in the Installation preparation of the solutions produced higher productivity (including under the soft Container (FIBC) of mass 1000kg).