induction heating equipment 200KW

induction heating equipment model: SF-200AB Main specifications: Maximum output power: 200KW Frequency: 8-30KHz Maximum input current: 320A Input voltage: 380VAC 3phases, 50 or 60Hz Duty cycle: 100% Cooling water: 0.1Mpa 80L/min Auto heating time: 0.1-99.9seconds Auto retaining time: 0.1-99.9seconds Auto cooling time: 0.1-99.9seconds Weight and dimension: Model Net weight(KG) Size: L x W x H (mm) Packing weightPacing size: L x W x H (mm) SF-200AB generator 172KG 603x852x1850mm 335KG1020x1400x1930mm SF-200AB transformer 125KG 841x546x580mm Main characteristics: IGBT inversion technology based LC series circuit .phase locking looping technology and soft switch ensure good reliability, realize power and frequency tracking automatically.diode rectifier cause high power factor more than 0.95working continuously with 100% duty cycle, power can be instantly turned on or shut off.perfect protective circuit and cooling system design, which ensure the good reliability of machine.low energy consumption: converts up to 97.5% above of the expended energy into useful heat. energy saving 15%-30% compared with SCR induction heating machine. environment friendly, clean, non-polluting process which will help protect the environment, improves working conditions for your employees by eliminating smoke, waste heat, noxious emissions and loud noise.operating and installation easily and safelycan subsititue traditional heating methods. Application: Rod forging bolt,nut forging heat treatment of shaft, gear, pin, etc. shrink-fitting annealing of pipe welding etc.