ID residual current circuit breaker/RCCB/RCD

Merlin Gerin Model ID RCCB, RCD APPLICATIONID RCCB is in conformity with the standard of IEC61008. The RCCB can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk, thus, it is suitable to avoid the shock hazard and fire caused by earth leakage. The RCCB is mainly suitable for use in varieties of plants and enterprises, building construction 1 phase 230V and 3 phase 400V 50/60Hz. RCCB is not suitable for use in DC pulse system.SPECIFCATIONS Number of Poles: 1P+N, 3P+N Rated Current(A): 16, 20, 25, 40, 50, 63 Rated Residual Operating Current(In)(mA): 30, 100, 300, 500 Rated Voltage(V): AC 230/240, AC400/415 Residual Operating Current Scope: 0.5In In Residual Current Off-time: <=0.3S Short Circuit Capacity(Icu): 6000A Endurance: 4000 Protection Degree: Ip20NORMAL OPERATION AND MOUNTING REQUIREMENT . Circumstance temperature-5º C +40º C, average temperature not exceeding 35º C. . Altitude above sea level less than 2000m. . Humidity not exceeding 50% at 40º C and not exceeding 90% at º C. . Installation class II or III. . Pollution class II. . Installation method DIN Rail mounting type. . The external magnetism shall not be more than 5 times of terrestrial one. . Product shall be installed vertically at the place where there shall be no severe impact and vibration. The product is switched on when the handle is at upper position.