Hydrojet suture - waterproofing of joints and seams in concrete

Hydrojet suture – material for waterproofing, eliminating the drip of leaks and water filtration through technological (working) joints, cracks, seams, places the input in the communication, coupling and abutment all concrete structures. Features: high strength plastic material has no shrinkage, high adhesion to concrete. Preparation: in the dry mixture add water according to the proportion: 200 g of water per 1 kg of the material, mix for 1-2 minutes, re-adding water is not permitted, prepare a quantity of solution that can be used for 20-30 minutes. During use, stir occasionally. The premixed – plastilinovaya udoboukladyvaemym solution. Technology application for prevention of water filtration through the junction, joints, cracks: to make the toothing 25x25 mm to cleanse and moisturize, Prime solution "Hydrojet penetrating" into one layer (0.1 kg on 1 sq. m.), tightly fill the indent with a solution of the material "Hydrojet suture", then filled the toothing and the mating surface to moisturize and treat with a solution of material "Hydrojet penetrating" in two layers. Consumption "Hydrojet suture" with the toothing 25x25 mm is 1.5 kg/p. Pogue. The thickness of the laying material layer should not exceed 30 mm, when sealing the deeper indent the necessary material to lay with perevalom before the time setting in multiple layers. Application for repair of waterproofing of the input places of communication: after laying the harness "Penabur" we need to be sealing solution "Hydrojet suture", after which Prime the material "Penetron" or "Hydrojet penetrating" in 2 layers. For waterproofing of the through-holes in concrete structures after removing the clamping screws need to be sealing materials "Hydrojet suture", then "Penetron" or "Hydrojet penetrating".