Hot Melt Glue for Velco

Hot Melt Glue for Velco Feature:Good Look tack,strong Peeling strength and Long holding power Application: NyloonHook Loop Technical parameters: PropertiesSpecification valueTest Method and equipmentShape/AppearanceyellowVisualSolid Content100%BaseHigh polymerSoften Point85±5degreeGB/T 15332 Softening point testerViscosity3800±500cpas at 180 degreeSNB-2 Digital Rotational Viscometer, 27# rotor test Storage period: 2 Years (indoor, unexposed to the sunlight, not more than 40 °C) Method for clearing equipment: You can consult to the equipment manufacturer, or clean the equipment by clean mineral oil at 120 °C.After clean-up, flush it by the same hot melt adhesive not more than 170 °C. Safety Precautions: To Minimize the risk of burns, please wear protective clothing & Goggles when working near the glue machine/applicator.To minimize the danger of Flammable vapors, the temperature should be lower than 180°C . Prevent the built-up of vapors, extinguish all sources of ignition during the use of hot melt. Package: each piece is about 500g and packed by release paper, then put in paper carton, 20Kg/CTN