HL-10 Battery water pump

etails for Battery water pump HL-10.Gift box size(cm)N.WG.WPackageΦ7×7×6812kg13kg30pcs/cartonOne 20'FCL: 6570PCSOne 40' HQ FCL:17880PCSDIRECTION: 1.For first time using,please charge the battery for at least 12-14 hours and make sure the battery work till exhausted 2.For first time using,let water run for 30 or 60 seconds to clean out pump3.Snap on the discharge hole on the frame of the pump 4.Push button "on" and the water will flow,push "off" to stop 5.Remove the tube cover cap and attatch to the bottle neck,after adjusting the cap to adapt the height of the containerCAUTION:1. Keep away from heat or flame 2. Keep iterectlywhen it is not in use3. Run it after submerging in the liquid. 4. Remove batteries while notin use for a long time 5. Don′t disassemble the product yourself, don′t use in a strong volatile,flammable,corrosive or hot liquids (above 140 °F/60°C ) 6. Keep tube cover away from bottom of the container. 7. Wash the inside of inlet by running water through after using liquid other than water. 8. Keep all parts of pump out of water except supply tube and cover. 9. Make sure the AC is stable .10. Keep it away from children when the battery is charging. 11. Pump noise is normal. 12. It is normal that the water may flow during operating 13.Do not use the pump for more than 8mins ,that will hurt the motorp