High Voltage Switchgear Cabient

High Voltage Switchgear Cabient I. SwitchgearSummary XGN2 type high-voltage switch cabinet, is a box-type, fixed and enclosed equipment (switch cabinet for short), applied to distribution substations of industrial and mineral enterprises, of 3, 6,10KV 3 phase 50Hz AC system for electricity distributing, particularly suitable for occasions of frequent operation. The elemental framework is made of welded angle irons. The main switch of this cabinet adopts vacuum contactor or ZN28A-10(12) series vacuum circuit breakers and CT series spring maneuvering mechanism. Isolating switch adopts GN-10 super current isolating switch series. II. Environmental conditions for the usage of the product 1. Ambient temperature: upper limit +40; lower limit: -25 2. Altitude no greater than 1000m; 3. Relative humidity: daily average humidity no greater than 95%, and monthly average no greater than 90%; 4. Steam pressure: daily average pressure no greater than 2.2×10³MPa, monthly average no greater than 90%; 5. Seismic intensity no greater than 8 degree; 6. No fire, explosive danger, grave filth, chemical corrosion and drastic vibration on the site. III. Technical data The power frequency of the control motor is 50 Hz, rating voltage 3 10KV and rating current of the stator is up to 2000A. For motor of different specifications the parameters of various electrical elements in terms of the main circuit, control circuit are determined by the technical data of the motor. Supporting components such as liquid resistance starter, reactor, and frequency sensitive rheostat can be used to control and start the motor. Protective devices including over-current, quick break, under voltage and earthing are equipped with the switch cabinet.