High-flow Pleated filter cartridge

The Hi-Flowment Filter cartridge is a new product developed by darlly filter equipment CO. in hangzhou China.It has a 6inch/152mm large diameter,and is coreless,single open-ended with an inside to outside flow pattern.The large diameter with big filterarea insures to reduce the number of filter cartridges and the dimention of housing requied.The long service life and high flowrate result in low investment an less manpowert in many applications. Gradient pore structure Up to 110M3/H folwrate per filter cartridge for water filtration. Maximum 50% reduction of filter system. 20.69inch/525mm,40.69inch/1033mm and 60.69inch/1541mm lengths are available. All contaminants can be removed within the cartridge because og the floe direction. Technical Specifications Materials of Components Filte media:Pleated glass fiber:Pleated depth Polypropylene(PP),or Melt blown PP. Support/Drainage:Polypropylene(PP). End caps:Glass fiber reinforced Polypropylene O-ring seal:EPDM,NBR Removal Ratings 1μm,4.5μm,6μm,10μm,20μm,40μm,70μm,100μm Dimensions Outside Diameter:6inch(152mm) Length:20.69inch(525mm) 40.69inch(1033mm) 60.69inch(1541mm) Operating Conditions Maximum Operating Temperature: pleated glass fiber:121°C pleated PP:82°C Melt Blown PP:65°C Maximum Differential pressure:pleated glass fiber:3.4bar at 121°C pleated PP:3.4bar at 82°C melt blown:1.03bar at 65°C Recommended change out differential pressure:2.4bar at 20°C Suggested maximum flow of water:20.69 inch length:660LPM; 40.69 inch length:1300LPM; 60.69 inch length:1900LPM; Applications prefiltration of RO,Pretreatment of sea water desalination condensate water filtration,hot water recovery in power generation API,solvents,and water filtration in blopham market The filtration of bottled water,high fructose,edible oil,soft drinks,and milk Paints and coatings,Petrochemical,Refineries Microelectronics,film,fiber and resin