High accuracy wire diameter controller

High accuracy wire diameter controlleris the high-accuracy survey installment that uses the laser scan to carry on Non-contact the on-line measure. Mainly used in a variety of wires, cables, pipe production line, the measurement of outer diameter and adjust the extruder screw speed or traction speed, to control the purpose of OD. Can also be applied to the outer diameter of workpiece and size measurements.1. Technical parametersModelMeasuring RangeDifferentiationAccuracyLDM-250.1-25mm0.001±0.02%×(Reading)±0.002mmLDM-500.2-50mm0.001±0.02%×(Reading)±0.002mm2. The performance indicators Measurement: Laser scanning Laser: Visible red semiconductor laser Laser output power: <2mW Operating voltage: 220V ± 15% 50 - 60Hz Operating temperature: -10 40 °C Humidity: <85% RH Work mode: continuous Power consumption: <30WExternal dimensions: Dimensions: LDM-25/LDM-50 Measuring head: 461mm×80mm×200mm3. The Device with the following Characteristics i. Can be connected PLC, industrial computer. ii. RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect. iii. Can be equipped remote controller DDC-3, DDC-5, on the extruder and automaticfeedback control to control the tolerance, improve product quality, reducingconsumption.4. Display Controller (Model:DDC-3,DDC-5) i. It be used to remote display and control. ii. Applicable to DC motors, VVVF motor. iii.The controller can control the speed of extruder or the tractor according to the diameter tolerance. Signal distance: More than 500m Output voltage: ±10V With RS485 It can connect to PLC industry controlling computer The PROFIBUS-DP or MODBUS Can be selected. External dimensions:164mm×85mm×280mm (Model:DDC-3) 100mm×100mm×120mm (Model:DDC-5) Installation hole size: 152mm×76mm (Model:DDC-3) 90mm×90mm (Model:DDC-5)Display Controller (Model: DDC-5)Display Controller (Model:DDC-3)