Hidden HD video USB Camera DVR

Hidden Hd video USB DISK Camera DVR Itemrelevant parametervideo formatAVI video codingM-JPEG resolution ratio1280*960 1280*720 720*480 640*480 VGA frame rate30fps play softwareThe operating system come with or video playback software mainstream picture formatJPG 1280*1024 image5M pix Image ratio4:3 support systemWindows me/2000 xp 2003/vista:M battery capacity300mAh working hoursAbout 120 minuters charging voltageDC-5V interface typeMINI 4pin USB Memory cardmicro SD card battery typeHigh capacity Polymer lithium electricity K1: on/off button, Separate recordings key K2: picture,camera key; K3: motion detecting camera keys; K4: State indicator K5: Scene K6: MIC K7: TF CARD K8: USB port 1, on/off: long press boot key K1, blue and red double light, at the same time machine shake, shake stop, initialization after blue shut off . Red lights keep lighting, enter standby at boot condition, long press K1 keys, machine shake and red light flash 3 times shutdown. 2, taking photo operation: in standby mode, the short press K2 keys, blue light red lights out and began to be photographed and preservation, finish clap as machine shake once and blue lights keep off , red light keep on, re-enter standby. 3, camera operation: in standby mode, the long press K2 keys, machine shake twice, the red light will keep off after three times flashing, photographing and short press K1 or K3 keys, the red lights will keep off after 6 times flashing;the product keep camera state. When camering, short press K2 key ,machine shake once, stop camera and save, meanwhile the red light up into the standby. 4, Separate recording operation: in standby. Short press K1 keys, machine shake once and red light off, blue lights flashing out three times after quench, it’s recording status, then short press K1 keys, machine shake once, save the recording and blue lights off are red light up and into the standby. 5, motion detecting videotape: on standby mode, the short press K3 , machine shake three times ,blue and red light up 4 times and off, into motion detecting camera standby mode, the front have the object was moving, and blue flash into motion detecting camera status, short press K3 , machine shake once, stop motion detecting video and save automatically and then into the standby. The motion detecting camera condition, short press K1 or K2 keys, red and blue light flashing 6 times out, simultaneously has instructed in this condition. 6, PC CAMERA: in shutdown condition, press K2 till put into the PC connected computers, CAMERA. 7, charge: connect the computer USB port or charger, the camera is charging when the battery in charging status, blue lights flashing, when a full battery, blue light off. Note: the camera built-in high-capacity polymer lithium battery, no memory effect, can charge any time when you use, but before 5 times, please put a battery recharging after you use to activate cells to saturated maximum capacity, obtain the standard working hours. 8, charging and camering operation: in charging, long press K3 to enter into standby at this time can take photos and video, sound recording, motion detecting operation. 9, set picture recording time: video files show video time function, format for: the year - month - date: hour: minuters:seconds, set a time method as below: Check if USB cable connect with computer is ok, and then my computer appear "moveable hard disk" picture. Open the Windows software attached tablet or notepad (*. TXT format) input: [date] 2010/05/05 12:59:30 Take a filename: time.txt save the file and put into moveable hard disk, cut off the USB cable to connect, open video, the time on the lower-right is the newly revised the time and date. Also can use this machine of stored WriteTime. exe file to update the video time, method for double-click WriteTime.exe in jumped out to update window update and then update