Heavy Wall Heat Shrink Tube

Heavy Wall Heat Shrink Tube (WITH HOT MELTING ADHESIVE) Features/ Applications Have properties of excellent insulating, environmental sealing, and resistant to impact and abrasion for applications to seal and protect electrical and communication connections, providing excellent mechanical protection to cable terminations and joints, 3:1 shrink ratio allows it easily fit over irregular shape and large connectors, KHRA3 is recommended to apply for light cable and wire harnesses, where requiring waterproofing, protection of connector components, and thus encapsulates and seals components contained within the tubing. Resistant to UV-radiation High electrical insulation Superior mechanical property Minimum fully recovery temperature:120 Standard color: Black Technical Data Product Dimensions Normal size(mm)As supplied (mm) ID(Min.)After recovered (mm) ID (Max.)Wall thickness (mm)(Min.)KHRA3 9/3 631.8KHRA3 13/4 1342.4KHRA3 22/6 2262.7KHRA3 33/8 3383.2KHRA3 40/12 40124.1KHRA3 45/12 45124.1KHRA3 55/16 55164.1KHRA3 75/22 75224.1KHRA3 85/25 85254.3KHRA3 95/30 95304.3KHRA3 105/30 105304.3KHRA3 130/36 130364.3KHRA3 160/50 160504.3KHRA3 180/50 180504.3KHRA3 200/60 200604.3Property Test Method Typical Data Operation temperature IEC216 -55to110 Tensile strength ASTMD2671 ≥14MPa Tensile strength after aging (150/168hrs) ASTMD2671 ≥12MPa Elongation at break ASTMD2671 ≥400% Elongation at break after aging (150/168hrs) ASTMD2671 ≥300% Density ASTMD792 1.05g/cm3 Longitudinal shrinkage UL224 0 to-10% Dielectric strength IEC243 ≥20kv/mm Volume resistance IEC93 1014Ω.cm Eccentricity ASTMD2671 30% Copper stability ASTMD2671 Pass Resistance to stress cracking (50) ASTMD1693 No cracking Water absorption(23/14days) ISO62 0.15% Property Test Method Typical Data Water absorption ISO62 0.2% Softening point ASTM D E28 85 Peel strength(PE) DIN 30672 4N/cm Copper stability ASTMD2671 Non-corrosive Resistance to fungus and decay ISO846 Pass Packing: 1.22 meter/PCS, special size, Cutting pieces are available on request.