Heatless Regenerative Absorption Air Dryer

Heatless Regenerative Absorption Air Dryer (Drying Machine) Heatless Regenerative Absorption Air Dryer (Drying Machine)is making use of the principle of transformation and absorption. When one absorption tower (working power) absorbs water under high pressure, another absorption tower (recycling tower) is off absorption under low pressure, then the dry air out from the working tower is about: 10 12% will purify and recycle to the recycling tower, then switch according to the technological time cycle which programmed by microcomputer. Characteristics: 1. This purifying device is a super-high-effect Heatless Regenerative product (Air Dryer)which is designed by making use of international advanced technique. 2. The recycling air quantity is adjustable according to the work condition and seasons changing, and the work time cycle is also adjustable, which has the significance of saving energy. 3. The air consumption of recycling is small: 10 12%. 4. The pressure loss is low: ≤0.01Mpa 5. It has special-made recycling noise elimination system, the yawp degree is ≤72db. 6. Electric components insulation: IP55. 7. It uses imported famous brand switch valve which has reliable switching effect. 8. Auto-controlled by micro computer. 9. Easy base installation without pre-embedding. Main Technological Parameters: Rating Work Pressure: 0.6-0.8Mpa (≤1.0Mpa) Temperature of inlet air: ≤38 Rating recycling air consumption: 10%-12% Pressure drop: ≤0.01Mpa Sorbent: Mainly molecular-bolt, active alumina Dew point of finished products pressure power: -40 (super-low dew point is optional as ≤-80) Work cycle and controlling mode: 4min or 10min cycle, Serial working auto-switched by micro computer Power: 220V/50Hz (110V/400V/60Hz is optional) Installation: No need cement base for medium or small scale equipment, Normal pressure and indoor installation