Heat Shrinkable Fiber Optic Protect Sleeving

1. Working Temperature -55 125 2. Shrinking temperature range 110 for 1 minute, and allow an aditional 30 seconds cooling down time before inserting the splice into a tray to allow the meltable Ahesive to set. 3. Technical Data Properties Test Method Typical Data Tensile StrengthMPa ASTM D 2671 18 Ultimate Elongation (%) ASTM D 2671 700 Density (g/cm2) ISO R1183D 0.94 Dielectric Strength (KV/mm) IEC 243 20 Dielectric Constant IEC 243 2.5 Longitudinal Change (%) ASTM D 2671 +3 4 Product Specifications (mm) Single Fiber Ref.No. Fusion Tube (D) Steel Rod (d) Splice Protector (L) Outside diameter Inside diameter length Diameter Length O.D. after Shrinking Length HSFP -61 2.30±0.05 1.40±0.03 61±1 1.50 55.00 3.0±0.1 61.00 HSFP -45 2.30±0.05 1.40±0.03 45±1 1.50 40.00 3.0±0.1 45.00 HSFP -23 2.30±0.05 1.40±0.03 23±1 1.50 18.00 3.0±0.1 23.00 HSFP -61T 1.90±0.05 1.40±0.03 61±1 1.00 57.00 2.4±0.1 61.00 HSFP -40T 1.90±0.05 1.40±0.03 40±1 1.00 36.00 2.4±0.1 40.00 HSFP -45T 1.90±0.05 1.40±0.03 45±1 1.00 41.00 2.4±0.1 45.00 HSFP-25T 1.90±0.05 1.40±0.03 25±1 1.00 21.00 2.4±0.1 21.00 HSFP-40M 1.90±0.05 1.40±0.03 40±1 0.50 40.00 1.9±0.1 40.00 HSFP-25M 0.90±0.05 0.50±0.03 25±1 0.50 25.00 1.30±0.05 25.00 HSFP-18M 0.90±0.05 0.50±0.03 18±1 0.50 18.00 1.30±0.05 18.00 HSFP-15M 0.90±0.05 0.50±0.03 15±1 0.50 15.00 1.30±0.05 15.00 Ribbon Fiber (mm) Ref. No. Length (mm) I.D. of fusion tube (mm)Ceramic rod sizes (mm) HSFP-40 (12) 40±1.0 3.6±0.1×1.3±0.1 ±0.1×2.0±0.1×39.2±0.2 Packing: 50pcs per plastic bag