HDMI 1.4 cable C male to C male

HDMI 1.4 cable C male to C male HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transmitting uncompressed digital data.[1] It represents a digital alternative to consumer analog standards, such as radio frequency (RF) coaxial cable, composite video, S-Video, SCART, component video, D-Terminal, or VGA. HDMI connects digital audio/video sources—such as set-top boxes, upconvert DVD players, HD DVD players, Blu-ray Disc players, AVCHD camcorders, personal computers (PCs), video game consoles such as the PlayStation 3, Xbox 360, and AV receivers—to compatible digital audio devices, computer monitors, and digital televisions. HDMI supports, on a single cable, any uncompressed TV or PC video format, including standard, enhanced, and high-definition video; up to 8 channels of compressed or uncompressed digital audio; and a Consumer Electronics Control (CEC) connection. The CEC allows HDMI devices to control each other when necessary and allows the user to operate multiple devices with one remote control handset.Because HDMI is electrically compatible with the signals used by Digital Visual Interface (DVI), no signal conversion is necessary, nor is there a loss of video quality when a DVI-to-HDMI adapter is used. As an uncompressed connection, HDMI is independent of the various digital television standards used by individual devices, such as ATSC and DVB, as these are encapsulations of compressed MPEG video streams (which can be decoded and output as an uncompressed video stream on HDMI). The HDMI standard was not designed to include passing closed caption data (for example, subtitles) to the television for decoding. So any closed caption stream has to be decoded and included as an image in the video stream(s) prior to transmission over an HDMI cable to be viewed on the DTV. This limits the caption style (even for digital captions) to only that decoded at the source prior to HDMI transmission. This also prevents closed captions when transmission over HDMI is required for upconversion. HDMI products started shipping in late 2003.Over 850 consumer electronics and PC companies have adopted the HDMI specification (HDMI Adopters). In Europe, either DVI-HDCP or HDMI is included in the HD ready in-store labelling specification for TV sets for HDTV, formulated by EICTA with SES Astra in 2005. HDMI began to appear on consumer HDTV camcorders and digital still cameras in 2006. Shipments of HDMI were expected to exceed that of DVI in 2008, driven primarily by the consumer electronics market. Specification The HDMI specification defines the protocols, signals, electrical interfaces, and mechanical requirements of the standard. The maximum pixel clock rate for HDMI 1.0 was 165MHz, which was sufficient for supporting 1080p and WUXGA (1920×1200) at 60Hz. HDMI 1.3 increased that to 340MHz, which allows for higher resolution (such as WQXGA, 2560×1600) across a single digital link. An HDMI connection can either be single-link (Type A/C) or dual-link (Type B) and can have a video pixel rate of 25MHz to 340MHz (for a single-link connection) or 25MHz to 680MHz (for a dual-link connection). Video formats with rates below 25MHz (e.g., 13.5MHz for 480i/NTSC) are transmitted using a pixel-repetition scheme Connector Type C A Mini connector defined in the HDMI 1.3 specification, it is intended for portable devices. It is smaller than the Type A plug connector (10.42mm × 2.42mm) but has the same 19-pin configuration.The differences are that all positive signals of the differential pairs are swapped with their corresponding shield, the DDC/CEC Ground is assigned to pin 13 instead of pin 17, the CEC is assigned to pin 14 instead of pin 13, and the reserved pin is 17 instead of pin 14.The Type C Mini connector can be connected to a Type A connector using a Type A-to-Type C cable. Version 1.4 HDMI 1.4 was released on May 28, 2009, and the first HDMI 1.4 products were available in the second half of 2009.HDMI 1.4 increases the maximum resolution to 4K × 2K (3840×2160p at 24Hz/25Hz/30Hz and 4096×2160p at 24Hz, which is a resolution used with digital theaters); an HDMI Ethernet Channel, which allows for a 100 Mb/s Ethernet connection between the two HDMI connected devices; and introduces an Audio Return Channel, 3D Over HDMI (HDMI 1.3 devices will only support this for 1080i) ,a new Micro HDMI Connector, expanded support for color spaces, and an Automotive Connection System. HDMI 1.4 supports several stereoscopic 3D formats including field alternative (interlaced), frame packing (a full resolution top-bottom format), line alternative full, side-by-side half, side-by-side full, 2D + depth, and 2D + depth + graphics + graphics depth (WOWvx), with additional top/bottom formats added in version 1.4a . HDMI 1.4 requires that 3D displays support the frame packing 3D format at either 720p50 and 1080p24 or 720p60 and 1080p24. High Speed HDMI 1.3 cables can support all HDMI 1.4 features except for the HDMI Ethernet Channel. HDMI 1.4a was released on March 4, 2010 and adds two additional mandatory 3D formats for broadcast content which was deferred with HDMI 1.4 in order to see the direction of the 3D broadcast market. HDMI 1.4a has defined mandatory 3D formats for broadcast, game, and movie content. HDMI 1.4a requires that 3D displays support the frame packing 3D format at either 720p50 and 1080p24 or 720p60 and 1080p24, side-by-side horizontal at either 1080i50 or 1080i60, and top-and-bottom at either 720p50 and 1080p24 or 720p60 and 1080p24 Packaging: 1.Regular packaging : L=50mm ,1pc/PE bag,450pcs/carton(K=K300*230*280mm) G.W.=10.5KG and N.W.=9.9 KG L=180mm ,1pc/PE bag and 300/carton(K=K300*230*280mm) G.W.=7.8KG N.W.=6.9 KG L=1500mm ,1pc/PE bag and 180 pcs/carton(K=K,450*450*340mm)G.W.=15.9KG ,N.W.=13.9 KG 2.Customized packaging is welcome.