HCH408 Two Nozzle High Speed Water Jet Loom with E

HCH408 Two Nozzle High Speed Water Jet Loom with Electronic Storage System weaving machine Preventing stop mark system This system is equipped by the enginery brought by the stop mark. Time enginery before the machine stars,tum or reverse the preestablished weft to revise the place of the mouse of loom and the corresponding parking time. Cloth-fell following device/warp laxation The length of weft can be preestablished according to the stopping time,in order to slack the tension of yam and prevent thestretched-out yarn caused by long-time stopping of the loom.the tension can be restored automatically when restart the loom Turn and revise in-phase Adopting the AC servo motor.pursue in-phase the quality of turning or reversing the let-off. Coiling device with electronic control By the coiling density which establishes in advance it can figure out the revolving number of motor,through controlling speed.causes the motor to revolve under certain speed .in addition,regarding the loom spot movements and so on,carries on the follow-up by the position control. Density enactment of coiling device with electronic control can be input by multifunctional operation set without switching gears. Correct density weave is not impossible because the coiling density can be adjusted in the scope of 0.1piece/inch.cooperating with 4 kind of coiling density established in advance,the change fabric of weft density also can be weaved. Mainfeature Hch408 is a new type water –jet loom, which has got whole in novation applicable to weaving high-weight and high-density cloth . The great improvement of vibration reduction, the excellent stability, the high speed and higher-efficiency can be suitable for weaving medium and premium cloth . The optional mechanical weft-storage system,2-nozzle and 3-nozzle electronic weft-storage,dobby shedding and tappet shedding can be mounted on this type of loom